Possible Front daytime LEDs for R1200RT

Looking for Aftermarket parts and Accessories for your BMW R1200RT/R1250RT or found something useful you want to share? Or just a general question?
Gadgetsandwheels
Posts: 34
Joined: Sun Nov 29, 2015 8:31 am

Possible Front daytime LEDs for R1200RT

Post by Gadgetsandwheels »

Now looking at LEDs for the front. These are the ones I've considered so far. From Halfords. Ring brand. Not exactly easy to find a good mounting point but I'm thinking of getting them mounted vertically without looking cheap n cheerful.  Will come back if I get a successful conclusion.

https://youtu.be/tDqFkvOFVpg
R1200RT 2015 after previously owning 3 R1200GS bikes.
T6pilot
Posts: 574
Joined: Sat Jun 27, 2015 6:12 am
Been liked: 1 time

Re: Possible Front daytime LEDs for R1200RT

Post by T6pilot »

We have skene photon Blasters on both our bikes, use front fender support for location mounting
Very visible in both daylight and darkness
Jim
guest3074

Re: Possible Front daytime LEDs for R1200RT

Post by guest3074 »

Will you be having a switch on them or some method of them going off when it's dark? Only some DRL's are too bright for night use.

I know they're expensive but I use clearwater lights on the front which function as DRL's and auto dim from the bike itself and go to full brightness on full beam as spot lights  :)
User avatar
Spencert231
Posts: 563
Joined: Mon Dec 22, 2014 8:01 am

Re: Possible Front daytime LEDs for R1200RT

Post by Spencert231 »

I just looked at the Clearwater Site and installation of their light system really impressed. Thanks for the heads up on that site Benchmark  :beer: :beer:
guest3074

Re: Possible Front daytime LEDs for R1200RT

Post by guest3074 »

Spencert231 wrote: I just looked at the Clearwater Site and installation of their light system really impressed. Thanks for the heads up on that site Benchmark  :beer: :beer:
You're ok, but I should of said the auto dimming is only available on the water cooled bikes, also the extra device (the CanOpener) will also operate any additional rear side/brake lights that you may want to add  :)
User avatar
Levisp
Posts: 1114
Joined: Sun Aug 31, 2014 12:57 pm
Been liked: 1 time

Re: Possible Front daytime LEDs for R1200RT

Post by Levisp »

Spencert231 wrote: I just looked at the Clearwater Site and installation of their light system really impressed. Thanks for the heads up on that site Benchmark  :beer: :beer:

These do look good lights, expensive but good. My mates have the BMW additional lights placed either side of the front forks making a triangle of light between headlight and aux lights. Must admit it does significantly improve visibility. What I like about the Clearwater lights are that they are LEDs, very bright and solid state with low current draw. Never been a fan of additional lights but I'm slowly coming round to their benefits. May have to start saving.
User avatar
stelyn
Posts: 525
Joined: Tue Oct 21, 2014 6:17 pm

Re: Possible Front daytime LEDs for R1200RT

Post by stelyn »

Levisp wrote: What I like about the Clearwater lights are that they are LEDs, very bright and solid state with low current draw.
Any indication what the Max electrical draw would be on  the system,  ( sorry may have missed this part)    ;)
Only a Motorcyclist knows why a dog rides with his head out the car window
User avatar
Levisp
Posts: 1114
Joined: Sun Aug 31, 2014 12:57 pm
Been liked: 1 time

Re: Possible Front daytime LEDs for R1200RT

Post by Levisp »

The Darla lights consume on high 24 Watts each thats 2 amps each. Total 4 amps for the pair on the high setting.


Just read their spec again and it states input power or consumption as being 20 Watts each. Either way its a very low power consumption for an impressive power output.
Last edited by Levisp on Tue Jan 26, 2016 10:32 am, edited 1 time in total.
Gadgetsandwheels
Posts: 34
Joined: Sun Nov 29, 2015 8:31 am

Re: Possible Front daytime LEDs for R1200RT

Post by Gadgetsandwheels »

Benchmark wrote: You're ok, but I should of said the auto dimming is only available on the water cooled bikes, also the extra device (the CanOpener) will also operate any additional rear side/brake lights that you may want to add :)
Thanks for info.  Do you happen to know which wire to tap into to get the auto-dimming current?
R1200RT 2015 after previously owning 3 R1200GS bikes.
guest3074

Re: Possible Front daytime LEDs for R1200RT

Post by guest3074 »

Gadgetsandwheels wrote: Thanks for info.  Do you happen to know which wire to tap into to get the auto-dimming current?
This is done by the CanOpener from Clearwater which taps into the bikes canbus and reads the data from the bike.

https://www.clearwaterlights.com//infopg_CANopener.html
Last edited by guest3074 on Tue Jan 26, 2016 12:15 pm, edited 1 time in total.
Gadgetsandwheels
Posts: 34
Joined: Sun Nov 29, 2015 8:31 am

Re: Possible Front daytime LEDs for R1200RT

Post by Gadgetsandwheels »

Benchmark wrote: This is done by the CanOpener from Clearwater which taps into the bikes canbus and reads the data from the bike.
https://www.clearwaterlights.com//infopg_CANopener.html
Ah right. It looks like the Angel eyes operate in that way so I'm assuming the source current for those will be pre-regulated.
R1200RT 2015 after previously owning 3 R1200GS bikes.
User avatar
vx5r
Posts: 12
Joined: Sun Oct 26, 2014 8:05 pm

Re: Possible Front daytime LEDs for R1200RT

Post by vx5r »

  I just installed the Clearwater Lights Darla with Canopener and Billie brake light.  Am very happy with the results and the way the controls work out.  Might be a bit spend but I see it as a great asset.  Love the way the lights flash with the horn....
User avatar
richardbd
Posts: 1468
Joined: Sat Dec 13, 2014 8:40 pm
Been liked: 2 times

Re: Possible Front daytime LEDs for R1200RT

Post by richardbd »

vx5r wrote: Love the way the lights flash with the horn....

That's cool.  Probably illegal - but cool!


;) ;)
Cleverbee
Posts: 210
Joined: Mon Oct 26, 2015 10:33 am

Re: Possible Front daytime LEDs for R1200RT

Post by Cleverbee »

I'm working on the same strategy of using Ring DRL.  Purchased from Halfords for £25, total power usage is 16w.
Looking at hard wiring them straight to the power socket that's behind left panel, which unless someone tells me otherwise, is the BMW aux light feed?
Wasn't looking at having them switched, just on all of the time the bike is running, had them on my LT for many years, worked a treat.
I'm not after extra light to see better, just purely for physical presence on the road, I believe it's called self preservation........
Welcome my Son, welcome to the Machine !
User avatar
Maz12
Posts: 436
Joined: Wed Jul 23, 2014 11:38 am
Been liked: 1 time

Re: Possible Front daytime LEDs for R1200RT

Post by Maz12 »

Dare I ask how much the Clearwater lights are inc fitting ?
Post Reply