Bar to PSI

[Gman1969]

Is there a way of changing the display from Bar to PSI - I did have a scroll through user settings and vehicle settings but did not find anything?

Cheers
Stuart

[guest2360]

No although its rumoured dealers can change but.  You only need to remember 2.5 and 2.9 on the dash.

[Yammer]

I am in Canada and took delivery of my 3rd Rt an 08, a 14, and now a 16.  Just took the new one out for its first stretch of the legs yesterday and to my surprise the pressure is indicated in PSI :kacsint2: .  I am in Canada its all metric on the dials as it should be and the other bikes were in bar... I never asked for psi....so am pleasantly surprised.  :clap:

[guest2360]

So if you go and buy a guage in Canada are they normally in metric or would they normally be in PSI. 

[Yammer]

My experience to date is that pressure is in bar.  I have only seen it in bar on a cdn spec bike, that is why I was shocked to see it in psi.  I have read in other forums that they can change the units at the shop but have never asked to have it done.  bar is a bit of a pain but hey 1 =14.7 is all you need to know in the long run

[bighopper]

I picked up my 2016 RT last Tuesday & the tire (tyre) pressure is in Bar. I am going to book my first service tomorrow & I am going to ask about getting it changed to PSI. And by the way pressure gauges  are usually in PSI in Canada.

[slparry]

it can be changed at the dealers or with a GS911

[Steve F]

Hey Steve! If you keep popping up on this forum, you're going to have to go out and get that RT! You know it makes sense!!