Remus headers and slip on
Remus headers and slip on
Hi guys
I have a 2015 of which I plan tomorrow to pick up a full Remus system which bypasses the cat so what remapping will I need
Cheers
Poddy from down under
I have a 2015 of which I plan tomorrow to pick up a full Remus system which bypasses the cat so what remapping will I need
Cheers
Poddy from down under
Re: Remus headers and slip on
I have just looked at the Remus site and it doesn't list one for the LC. Where are you getting it from.
Just found it on Remus US site. Had a Remus end can on an 1150. VERY noisy, no noticeable increase in performance and slightly dodge build quality. You never know, they might have improved. Don't think remapping will be needed though. Surly Remus would tell you if it did.
Just found it on Remus US site. Had a Remus end can on an 1150. VERY noisy, no noticeable increase in performance and slightly dodge build quality. You never know, they might have improved. Don't think remapping will be needed though. Surly Remus would tell you if it did.
Last edited by guest2360 on Tue Mar 29, 2016 2:34 pm, edited 1 time in total.
- David.
- Subscriber
- Posts: 8300
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 387 times
Re: Remus headers and slip on
Found this from Motorworks in the UK, http://www.motorworks.co.uk/vlive/TheShed/PDF/Remus.pdfPoddy wrote:I have a 2015 of which I plan tomorrow to pick up a full Remus system which bypasses the cat so what remapping will I need.
When fitting a Full System, they say,
"No need to re -jet / re-map (Optional).
Extensively dyno tested to ensure healthy power and torque curves with no ''flat spots''."
The Cat. is removed, but the Oxygen Sensors are retained.
http://www.revzilla.com/assets/0001/375 ... omplet.pdf
Having said that, some Folks have had their RT LC's remapped with the BMW OEM System.
Motorworks (UK) sell Remus Header Sets, Silencers & Complete Systems for the RT LC,
https://www.motorworks.co.uk/vlive/Shop ... 5_36_JA_37
Last edited by David. on Tue Mar 29, 2016 4:29 pm, edited 1 time in total.
Re: Remus headers and slip on
Wow, they ain't cheep, 1K+. If I was going down that route the cat would stay and an Akra titanium end can would be my choice. still have half the money left.
Re: Remus headers and slip on
Depends if you want to be an anti-social noisy so and so as my last bike (kawasaki Versys) if you completely removed the end can it wasn't over loud as the cat did a good job of noise reduction RTman10 wrote: If I was going down that route the cat would stay
Re: Remus headers and slip on
i just did a full Remus system on my '11 - after about 500 miles i ended up putting the stock header back on - not loud like my harleys, just the tone of the full system annoyed me. It's perfect now with the stock header/slip on imo. i used the booster plug along with the install and seems to run great with the stock header or the Remus header.
[attachimg=1]
[attachimg=1]
Re: Remus headers and slip on
Finally got to do a good ride with the Headers and Cann on and live it, the seat of my pants Dyno gave it a big thumbs up and the run up to 200+ kph is faster than its every been
Good choice for me
Good choice for me
Re: Remus headers and slip on
Poddy wrote: Finally got to do a good ride with the Headers and Cann on and live it, the seat of my pants Dyno gave it a big thumbs up and the run up to 200+ kph is faster than its every been
Good choice for me
Glad you're happy with it mate, thats all that matters. I just have the Akra can on mine, and thats plenty loud enough for me, even with the DB killer in.
I would suggest getting your bike a good remap though, as this would be the icing on the cake. And it would sort out any Lean-running issues that de-catting can cause.
http://hilltopmotorcycles.co.uk/ did my 2014 RTLC, and the results were superb.
Garage: 2016 BMW R1200RTLE Iconic #26, 2016 Ducati Diavel Titanium, 2015 Ninja H2 missile, 2013 BMW 640d Ragtop, 2014 VeeDub T5 180 Sportline
Re: Remus headers and slip on
slothy wrote: i just did a full Remus system on my '11...
[attachimg=1]
Good job you told us the year - for a minute I thought they'd fitted the can on the wrong side!
;-)
Re: Remus headers and slip on
richardbd wrote:
Good job you told us the year - for a minute I thought they'd fitted the can on the wrong side!
;-)
hahaha - i have since taken the header off - sounds better with stock head and remus muffler imo
Re: Remus headers and slip on
Having done the deed on the headers I have to say it has opened up the bike, the extra performance is well worth it, it is more that it just gets there quicker and the sound, well others love it, I'm on the bike so can't really tell.
Re: Remus headers and slip on
I just ordered a complete Remus and power plug for my 2018 RT
I had the headers ceramic coated black and the joiners also
Will see in april
GB
I had the headers ceramic coated black and the joiners also
Will see in april
GB
Re: Remus headers and slip on
Gee-Bee wrote: I just ordered a complete Remus and power plug for my 2018 RT
I had the headers ceramic coated black and the joiners also
Will see in april
GB
Assume you have checked that this won't impact your warranty. Are you also getting the bike mapped?
Re: Remus headers and slip on
No problem from dealer , mapped yes
cat delete with power play
I just dont like chrome
cat delete with power play
I just dont like chrome
Re: Remus headers and slip on
Are you in the Europe or the US. My UK dealer advised me against using a Remus slip on due to warranty and so I bought the Akra.