2014RTW - transmission oil change - where's the drain & refill plugs

Having Problems with your BMW R1200RT/R1250RT? or have some Maintenance and Service questions?
T6pilot
Posts: 574
Joined: Sat Jun 27, 2015 6:12 am
Been liked: 1 time

Re: 2014RTW - transmission oil change - where's the drain & refill plugs

Post by T6pilot »

Smoothly was the correct word, darn auto spell
Jim
Jim
User avatar
Levisp
Posts: 1114
Joined: Sun Aug 31, 2014 12:57 pm
Been liked: 1 time

Re: 2014RTW - transmission oil change - where's the drain & refill plugs

Post by Levisp »

A trick I use is wrap the exhaust pipe under the filter with some tin foil (aluminium foil) before removing filter. Keeps oil off the hot exhaust pipe and so requiring no clean up.
Attachments
IMG_0158.JPG
User avatar
Levisp
Posts: 1114
Joined: Sun Aug 31, 2014 12:57 pm
Been liked: 1 time

Re: 2014RTW - transmission oil change - where's the drain & refill plugs

Post by Levisp »

I have now fitted a Stahlbus quick drain valve instead of drain bolt, so oil changes are even quicker and cleaner.


http://www.stahlbus.com/products/en/oil ... /index.php
Attachments
thumb_IMG_0394_1024.jpg
Last edited by Levisp on Tue May 31, 2016 4:14 pm, edited 1 time in total.
User avatar
richardbd
Posts: 1468
Joined: Sat Dec 13, 2014 8:40 pm
Been liked: 2 times

Re: 2014RTW - transmission oil change - where's the drain & refill plugs

Post by richardbd »

T6pilot wrote: Mattye
Takes longer to remove plastic fairing around oil filter, than it does to change the oil and filter, since BMW has also relocated the final drive drain and filler on the LC bikes no reason not to change this oil at each service
Now if reinstalling fairing around filter would only go snoothly

You boys constantly remind me why I let my dealer deal with all this stuff - that's why they're called dealers!


:alas: :alas: :alas:
guest2360

Re: 2014RTW - transmission oil change - where's the drain & refill plugs

Post by guest2360 »

Filter can be removed and replaced without removing plastic.
User avatar
Levisp
Posts: 1114
Joined: Sun Aug 31, 2014 12:57 pm
Been liked: 1 time

Re: 2014RTW - transmission oil change - where's the drain & refill plugs

Post by Levisp »

RTman10 wrote: Filter can be removed and replaced without removing plastic.

With difficulty on LC bike. Its only three screws to remove lower fairing. Easy to remove and just as easy to put back on. First task in BMW Manual is to remove lower fairing.
Last edited by Levisp on Tue May 31, 2016 6:56 pm, edited 1 time in total.
T6pilot
Posts: 574
Joined: Sat Jun 27, 2015 6:12 am
Been liked: 1 time

Re: 2014RTW - transmission oil change - where's the drain & refill plugs

Post by T6pilot »

RTman10 wrote: Filter can be removed and replaced without removing plastic.
Gonna try it next week
Bottom screw on Tupperware never wants to co-operate with install
Jim
tinman
Posts: 1
Joined: Sun Sep 11, 2016 2:50 am

Re: 2014RTW - transmission oil change - where's the drain & refill plugs

Post by tinman »

I am new to the board. I purchased a used 2014 R1200RTW and it is getting close to time for my first oil change. I have read posts where people mention using Rotella T6, but I checked out a jug today and it does not say JASO MA2, am I missing something or does the oil not meet the specs?
guest2360

Re: 2014RTW - transmission oil change - where's the drain & refill plugs

Post by guest2360 »

If you read the Shell blurb it would appear to be designed more fir diesel engines. Would suggest you stick with what the manufacturer recommends.
User avatar
David.
Subscriber
Posts: 8342
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 395 times
Great Britain

Re: 2014RTW - transmission oil change - where's the drain & refill plugs

Post by David. »

tinman wrote:I have read posts where people mention using Rotella T6, but I checked out a jug today and it does not say JASO MA2, am I missing something or does the oil not meet the specs?
After doing some research (Google),  it seems that Shell Rotella T6 is available in the US, yes it's aimed at the automotive sector not for motorcycle use.
However, it can be used in pre-LC RT's with a dry clutch, (like a car or truck).

The JASO MA2 spec. is for wet clutches, like in the LC RT.

Don't think Shell do a 5w-40 for the LC's but Castrol do, otherwise, it's pay a premium for the BMW branded stuff (made by Shell).
Last edited by David. on Tue Sep 13, 2016 9:10 am, edited 1 time in total.
Post Reply