Hello
New to bmw R1200rt, I would like to install some new Fenix Bullit fog lights on my 2016 rt, not familiar
With Bmw electricals. anybody have a video or pictures of an installation looking at the 12 v, the batterie
Is hard to get to.
I also have a Jvc camera that Inwould like to use to film my rides, any installation suggestions
Thank you again
Claude G.
Help for Fenix bullets fog lights and camera installation
Re: Help for Fenix bullets fog lights and camera installation
You don't need to remove the battery to gain access to the positive terminal, just to the right of the battery is a small round plastic cover over a terminal, this is the main positive lead from the battery so pull off the plastic cover and you can undo the terminal to connect your lead
Re: Help for Fenix bullets fog lights and camera installation
Wish I'd known that when I was putting the lead on for my heated gearBenchmark wrote: You don't need to remove the battery to gain access to the positive terminal, just to the right of the battery is a small round plastic cover over a terminal, this is the main positive lead from the battery so pull off the plastic cover and you can undo the terminal to connect your lead
- Rossyuk39
- Posts: 24
- Joined: Mon Nov 07, 2016 9:26 pm
- Location: Glos'Shire
- Bike Model and Year: RT 2015
- Has liked: 8 times
- Been liked: 5 times
- Contact:
Re: Help for Fenix bullets fog lights and camera installation
If you are installing many electrical "farkles", you could consider using a fusebox or distribution box (http://www.sportouring.co.uk/product-ca ... tions/sps/) and using a trigger to energise it when the ignotion is switched on. I have used one fro my Autocom, Ride+ camera, driving lamps and heated gear wiring looms.
Hope this helps.......
Hope this helps.......
Keep on the grey bits .....Rossy