factory lowered

[pencile]

I was looking at buying a 1200RT that is advertised as "factory lowered."  He told me that it sits about 2 inches lower than a stock bike.  No one really wants the bike because of this, hence the really good price.  My question is, can this be restored back to factory stock height?  If so how much work and money would it take?

[Galuois]

What year is it?

Sent from my D5503 using Tapatalk

[pencile]

its a 2013

[Galuois]

I bought a used 2005 that had also been lowered at the dealership with a pair of wilbers.

I didn't like the ride, so I decided to change the shocks. I got a pair of OEM ohlins installed and sold on eBay the wilbers.

Sent from my D5503 using Tapatalk

[Galuois]

Wunderlich US has the online on sale now.

Sent from my D5503 using Tapatalk

[Galuois]

Öhlins*

Sent from my D5503 using Tapatalk

[guest2360]

The factory lowered version is what is says, factory lowered.  It has different non ESA suspention and a different unheated bench seat.  It's height is 750mm I seem to recall. 
Not a particularly comfortable bike due to restricted suspension movement and it's not difficult to ground bits.    Steer clear.

[BBT600]

Is it possible to lower a standard RT by exchanging the shocks?

[guest2360]

Sure it is but you would loose ESA and any resale value.  The side and centre stands would also need to be modified.  Wouldn't suggest trying anything on an LC though.

[smithy]

just change the springs :be happy:

[richardbd]

just change the springsbe

But then the stands are too long...

[smithy]

I cut 25mm of the bottom of my side stand re-welded the foot back on and just use a block of wood under the rear wheel in my workshop for getting it onto the centre stand.

[richardbd]

I cut 25mm of the bottom of my side stand re-welded the foot back on and just use a block of wood under the rear wheel in my workshop for getting it onto the centre stand.

That sounds convenient...