Got new Tupperware anyone know what these holes are for?

General discussion of the BMW R1200RT/R1250RT
Post Reply
Ihbond
Posts: 20
Joined: Fri Feb 24, 2017 5:25 am

Got new Tupperware anyone know what these holes are for?

Post by Ihbond »

Just had some new Tupperware put on my 2016 r1200rt, was in a accident. Notice the three holes on the windshield trim.  This is what the BMW shop put on to replace my windshield trim, also notice the outside hole is off the edge.


Any thoughts ? Cooling? Defect?
Attachments
IMG_0768.JPG
2016 r1200rt
guest2360

Re: Got new Tupperware anyone know what these holes are for?

Post by guest2360 »

Take it back.  Can't find that part anywhere.  No bolt holes at all,in any I have ever seen .  Might be your photo but it looks like it overlaps the headlight as well.
guest2360

Re: Got new Tupperware anyone know what these holes are for?

Post by guest2360 »

David. wrote: Image

It's the bit below I think he's on about .  The one across the top of the headlight.
Ihbond
Posts: 20
Joined: Fri Feb 24, 2017 5:25 am

Re: Got new Tupperware anyone know what these holes are for?

Post by Ihbond »

Now is that picture for the halo lights?  Part #20 black trim is what I am referring to...but There should be a black trim piece below it, I think for the halo lights ...thanks for the picture. .


It will be interesting to see what the mothership says about this. My BMW shop are asking them...they mentioned this might be new for 2017, i call BS but thought I would ask first.....
Last edited by Ihbond on Wed Jul 19, 2017 5:39 pm, edited 1 time in total.
2016 r1200rt
Ihbond
Posts: 20
Joined: Fri Feb 24, 2017 5:25 am

Re: Got new Tupperware anyone know what these holes are for?

Post by Ihbond »

Hmmm, after looking at the picture and the bill of material. The headlight was also replaced.  So maybe the new halos have them?
2016 r1200rt
User avatar
David.
Subscriber
Posts: 8301
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 388 times
Great Britain

Re: Got new Tupperware anyone know what these holes are for?

Post by David. »

Ihbond wrote:The headlight was also replaced.
Has the rebuild been done correctly, check visually against a 2016 model in the showroom.

Are the part numbers & descriptions of the relevant replacement parts available to check against RealOEM.
Last edited by David. on Wed Jul 19, 2017 6:03 pm, edited 1 time in total.
guest2360

Re: Got new Tupperware anyone know what these holes are for?

Post by guest2360 »

Looks to me like they have used a second hand part. If you look it up on Real OEM you will see there are no holes in the centre strip above the light.  Part No is 46637728786
Last edited by guest2360 on Wed Jul 19, 2017 6:32 pm, edited 1 time in total.
User avatar
David.
Subscriber
Posts: 8301
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 388 times
Great Britain

Re: Got new Tupperware anyone know what these holes are for?

Post by David. »

46637728786 Trim cover upper section

Image

Image
Last edited by David. on Wed Jul 19, 2017 7:03 pm, edited 1 time in total.
guest2360

Re: Got new Tupperware anyone know what these holes are for?

Post by guest2360 »

Whatever they have put on your bike it's not correct.  Was it a BMW Dealer who fixed your bike or some repair shop.  If it was repaired under insurance its probably time to tell them as well.
Ihbond
Posts: 20
Joined: Fri Feb 24, 2017 5:25 am

Re: Got new Tupperware anyone know what these holes are for?

Post by Ihbond »

Fixed by BMW authorized service department. Good idea about insurance company.....
2016 r1200rt
guest2360

Re: Got new Tupperware anyone know what these holes are for?

Post by guest2360 »

Ihbond wrote: Fixed by BMW authorized service department. Good idea about insurance company.....

But was it a workshop based in a BMW dealership or somewhere that repaired other makes as well.
I have seen some horrors from (authorised workshops)
Ihbond
Posts: 20
Joined: Fri Feb 24, 2017 5:25 am

Re: Got new Tupperware anyone know what these holes are for?

Post by Ihbond »

2016 r1200rt
guest2360

Re: Got new Tupperware anyone know what these holes are for?

Post by guest2360 »

Yep, a BMW dealer OK.  Better get back there and show them the evidence. If you get no joy contact Bmw USA Customer Services.  Dealers love that.
Post Reply