Beagle, great news.
As an aside, how did you fix the camera under the headlight?
My drift Ghost S is held in a locking bracket with 3M (or similar) fixing the bracket.
When I fitted the camera to the CBR I had to make a bracket to connect the fittings supplisd to a fairing fixing. It is good and secure but I didn't think I could use the same type of fitting on my RT.
Details of your fitting would be welcome.
Take care
Barry
Barry,
The tube the camera is in is a piece of plastic rack shelve support thats in my greenhouse and was spare. The camera is wrapped in a layer of foam left over from fiitting wood flooring that acted as an underfelt. The bit attached to the tube is a plastic bit I had lying around and filed to suit the tubing. Its velcrode to the headlight.
There is a plastic loop at the rear of headlight underneath that the wire from the camera is attached by tywrap for added security.
Attachments
Last edited by Beagle on Mon Feb 04, 2019 10:20 am, edited 1 time in total.
I mounted my motorcycle dash cam on the side fairing, just below the handlebars. It offers a clear view ahead without obstructing my vision. However, it may depend on your bike's model and windshield design. If mounting behind the windshield is challenging, consider alternative locations like the upper crash bars or helmet mount. Experiment with different positions to find one that provides a clear view of the road while minimizing wind resistance.
Last edited by jbwalter on Wed May 22, 2024 4:29 pm, edited 1 time in total.
