2006 R1200RT Bent Front Fairing Bracket

Having Problems with your BMW R1200RT/R1250RT? or have some Maintenance and Service questions?
Post Reply
User avatar
masegraves
Posts: 17
Joined: Tue Feb 26, 2019 6:01 pm

2006 R1200RT Bent Front Fairing Bracket

Post by masegraves »

I posted this topic on the BMW MOA forum, but I wanted to also post it here where there seems to be a lot of technical no-how for the R1200RT.
I had a close encounter with a Ford Pickup truck on the left side of my 2006 R1200RT. I was untouched, but... the left mirror was knocked off and the part of the front fairing just in front of the mirror was scraped. It is slight, but the entire front fairing appears to be turned slightly to the right. It looks to be only a few degrees when bike is running straight down the road. My first guess is that the fairing bracket is slightly bent. I'm just wondering how this sort of damage is fixed. Is it always necessary to replace the bracket ($963 from BMW, but less if you find one used),or can the bracket be bent back into shape if it's not too far gone? Photos show orientation of bars to fairing with wheel straight, and with bars turned to full stop left and right. Thanks for your input.
Mark Segraves
Chicago, IL
MOA #214587
ImageImageImage
User avatar
masegraves
Posts: 17
Joined: Tue Feb 26, 2019 6:01 pm

Re: 2006 R1200RT Bent Front Fairing Bracket

Post by masegraves »

[attachimg=1][attachimg=2][attachimg=3]
Attachments
IMG_20190328_071819_sml.jpg
IMG_20190328_071734_sml.jpg
IMG_20190328_071659_sml.jpg
User avatar
David.
Subscriber
Posts: 8300
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 387 times
Great Britain

Re: 2006 R1200RT Bent Front Fairing Bracket

Post by David. »

Looking at the construction of the front fairing bracket, after the minimal impact, you'd think that it might just pull back into shape.

Image
User avatar
masegraves
Posts: 17
Joined: Tue Feb 26, 2019 6:01 pm

Re: 2006 R1200RT Bent Front Fairing Bracket

Post by masegraves »

Thanks. I agree. That is what I'm hoping. Of course, knowing when it is back the way it should be may be difficult to tell without putting everything back on it.
User avatar
David.
Subscriber
Posts: 8300
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 387 times
Great Britain

Re: 2006 R1200RT Bent Front Fairing Bracket

Post by David. »

masegraves wrote:Knowing when it is back the way it should be may be difficult to tell without putting everything back on it.
Would putting a straight edge across the bracket & taking some measurements from the headstock work.

Image
Last edited by David. on Fri Mar 29, 2019 7:46 am, edited 1 time in total.
User avatar
masegraves
Posts: 17
Joined: Tue Feb 26, 2019 6:01 pm

Re: 2006 R1200RT Bent Front Fairing Bracket

Post by masegraves »

Yes. I understand what you are saying. I think that is a good idea. I will definitely try that.
Post Reply