Hi, I've got two questions about the cylindrical connector for the big RT/LT('14-'18) top case:
1. How do I open up the male part of the 10 pin connector? http://www.autotestaid.com/productshow.asp?id=1195
2. Which wire form the top case is going to which pin number?
Top Case Connector
-
- Posts: 43
- Joined: Sun Nov 08, 2015 11:10 am
Top Case Connector
Last edited by circlehappenork on Wed Apr 03, 2019 10:13 am, edited 1 time in total.
- David.
- Subscriber
- Posts: 8300
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 387 times
Re: Top Case Connector
Is this thread on BMWLT any help, https://www.bmwlt.com/forums/rt-series/ ... -case.html
Here is a picture of the connector coming from the top box.
https://goo.gl/photos/n6Gc1dffv1Y5B6Z46
https://goo.gl/photos/wV11rRjJpN6jjMo99
Here is a picture of the connector coming from the top box.
https://goo.gl/photos/n6Gc1dffv1Y5B6Z46
https://goo.gl/photos/wV11rRjJpN6jjMo99
Last edited by David. on Wed Apr 03, 2019 11:23 am, edited 1 time in total.
-
- Posts: 43
- Joined: Sun Nov 08, 2015 11:10 am
Re: Top Case Connector
Thanks David.
The second picture answered my second question. I've read through the topic on the lt forum, but didn't found how to disassemble the connector to be able plug in the wires from top case.
Atm my connector looks like this.
The second picture answered my second question. I've read through the topic on the lt forum, but didn't found how to disassemble the connector to be able plug in the wires from top case.
Atm my connector looks like this.
- David.
- Subscriber
- Posts: 8300
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 387 times
Re: Top Case Connector
Does the connector actually disassemble, or is a method similar to that in this video required, https://www.youtube.com/watch?v=-7oSpcL1jBYcirclehappenork wrote:I've read through the topic on the lt forum, but didn't found how to disassemble the connector to be able plug in the wires from top case.
-
- Posts: 43
- Joined: Sun Nov 08, 2015 11:10 am
- David.
- Subscriber
- Posts: 8300
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 387 times
Re: Top Case Connector
This is the tool which the guy in the video used, https://www.lislecorp.com/specialty-too ... minal-tool others are available, might be worth contacting Lisle.
Lisle - Wire Terminal Tool Kit, https://www.youtube.com/watch?v=K6FLYaPcUrk
Lisle - Wire Terminal Tool Kit, https://www.youtube.com/watch?v=K6FLYaPcUrk