Idle speed adjustment?
-
David.
- Subscriber
- Posts: 8305
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 389 times
Re: Idle speed adjustment?
I'm not 100% sure on this, I usually get a man in, but here are my thoughts.
My understanding is that the idle speed is controlled by the ECU via the stepper motors. I believe calibrating the stepper motors is what is required.
JVB, (a BMW Guru) says, http://www.jimvonbaden.com/R1200_TB_Sync.html
This Hex Code article seems to explain how stepper motors work, https://www.hexcode.co.za/techinfo/iac
My understanding is that the idle speed is controlled by the ECU via the stepper motors. I believe calibrating the stepper motors is what is required.
JVB, (a BMW Guru) says, http://www.jimvonbaden.com/R1200_TB_Sync.html
This Hex Code article seems to explain how stepper motors work, https://www.hexcode.co.za/techinfo/iac
Last edited by David. on Wed May 13, 2020 10:57 am, edited 1 time in total.