Headlight
- Dartman340ta
- Posts: 46
- Joined: Mon Oct 05, 2020 8:07 pm
Headlight
Well doing a headlight is such fun. Big hands tiny places. but we have it apart waiting on bulb
- Dartman340ta
- Posts: 46
- Joined: Mon Oct 05, 2020 8:07 pm
Re: Headlight
Well it was replaced but no fun. How in the world do they expect you to hold up that wire retaining clip and place the bulb in a fix spot. But any how
Re: Headlight
Roll on LED headlights. Then when they fail will cost an arm and a leg to fix. Progress don't you love it.
-
- Posts: 184
- Joined: Tue Dec 22, 2015 11:23 pm
- Location: Somerset
- Has liked: 14 times
- Been liked: 7 times
Re: Headlight
I've swapped the bulbs once on my RT, I think next time I'll be asking my Daughter to swap the actual bulb with her more dainty hands!!!
-
- Subscriber
- Posts: 192
- Joined: Sat Mar 14, 2020 8:13 pm
- Location: North Lincs
- Bike Model and Year: 1200RT LE 2015
- Has liked: 29 times
- Been liked: 42 times
Re: Headlight
Ah the good old days when my little Yammy used to blow its 6v 25w bulb. One screw to undo, one rubber seal to pull, one half turn and bulb out. Why do BMW have to complicate a pretty regular service item as a bulb replacement. Just another thing, I could change the plug in 20 seconds too.
Ok I'm an oldie and sometimes reminisce too much!
Ok I'm an oldie and sometimes reminisce too much!
Re: Headlight
Why do BMW make the headlight a sealed unit. When this happens
[attachimg=1]
you have to buy a completely new unit. It would be so easy just to buy a lens, a seal and fit with a few screws. If you want complicated then you have this.
[attachimg=1]
you have to buy a completely new unit. It would be so easy just to buy a lens, a seal and fit with a few screws. If you want complicated then you have this.
-
- Posts: 184
- Joined: Tue Dec 22, 2015 11:23 pm
- Location: Somerset
- Has liked: 14 times
- Been liked: 7 times
Re: Headlight
Peter Baker wrote: I'm guessing that replacement was not cheap either:-(
For sure cannot remember the exact cost but was something between £620 - £720. What was so annoying was that apart from the broken lens the rest of the headlight unit was fine. What took me back a little is how thin the plastic lens is. When you consider its quite a large flat unsupported area its really not that very strong. I now have a headlight protector.
- Dartman340ta
- Posts: 46
- Joined: Mon Oct 05, 2020 8:07 pm
Re: Headlight
Dartman340ta wrote: Headlight protector. Never new they made such a thing. Who sells them
The one I got was from R&G. Held in place with 3M pads. Easy to take off for cleaning. Will it protect the headlight from a bird strike who knows but it might from flying stones.
- David.
- Subscriber
- Posts: 8324
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 392 times
-
- Subscriber
- Posts: 192
- Joined: Sat Mar 14, 2020 8:13 pm
- Location: North Lincs
- Bike Model and Year: 1200RT LE 2015
- Has liked: 29 times
- Been liked: 42 times
Re: Headlight
Nippy Normans selling protectors for £29- bargain to save £700 plus for potential headlight replacement for a wayward stone, or insect.
-
- Posts: 554
- Joined: Fri Nov 03, 2017 10:54 am
Re: Headlight
Dartman340ta wrote: Headlight protector. Never new they made such a thing.
Really!
this subject has come up so often. So many threads about farkles and what people consider important.The headlight protector is pretty much up there as most important. So many people have experienced their headlight lens becoming micro pitted (let alone smashed).
So yes, get yourself some sort of headlight protection.
- Dartman340ta
- Posts: 46
- Joined: Mon Oct 05, 2020 8:07 pm
Re: Headlight
I never new. Guess I’ve been riding those airheads to long. But I can see how it would protect the headlight from damage. Wondering if you get wind noise from it.