RT Models & Specifications (UK)
- David.
- Subscriber
- Posts: 8342
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 395 times
RT Models & Specifications (UK)
This question has been asked of the RT, "Would be interested to know what percentages of spec. levels purchased in UK."
Here is your opportunity to participate in a very meaningful UK survey.
The models listed in the poll are Hexhead, Camhead, Wethead (1200) & Shifthead (1250). As far as I know, the specs. were Base, SE or LE.
If I've missed any models/specs. please let me know. I'll kick it off with a Camhead SE.
Here is your opportunity to participate in a very meaningful UK survey.
The models listed in the poll are Hexhead, Camhead, Wethead (1200) & Shifthead (1250). As far as I know, the specs. were Base, SE or LE.
If I've missed any models/specs. please let me know. I'll kick it off with a Camhead SE.
Re: RT Models & Specifications (UK)
You can only vote once, I have two, both LE, one 1200 and one 1250
- David.
- Subscriber
- Posts: 8342
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 395 times
Re: RT Models & Specifications (UK)
The spec. of my Camhead is shown on the (used) sales invoice and written in the Rider's Manual.
This VIN Decoder https://www.mdecoder.com/ can be used to list the spec./accessories etc. but unfortunately doesn't say whether it's a Base, SE or LE model.
This VIN Decoder https://www.mdecoder.com/ can be used to list the spec./accessories etc. but unfortunately doesn't say whether it's a Base, SE or LE model.
Last edited by David. on Thu Mar 11, 2021 7:20 pm, edited 1 time in total.
-
- Posts: 845
- Joined: Fri Apr 21, 2017 11:38 am
- Bike Model and Year: 2017
- Has liked: 133 times
- Been liked: 69 times
Re: RT Models & Specifications (UK)
Casbar wrote: You can only vote once, I have two, both LE, one 1200 and one 1250
That's just downright greedy Casbar, How about bringing one of them to Annual meet, Its not far from you and haven't seen you since you told me about this forum.
Re: RT Models & Specifications (UK)
BoB21 wrote:
That's just downright greedy Casbar, How about bringing one of them to Annual meet, Its not far from you and haven't seen you since you told me about this forum.
Haven't looked at it I'll have a look
- David.
- Subscriber
- Posts: 8342
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 395 times
Re: RT Models & Specifications (UK)
There you go, "Our survey says", someone has a Shifthead - SE. Now the question is, does it have Gearshift assist pro. fitted or not.
Last edited by David. on Fri Mar 12, 2021 9:07 am, edited 1 time in total.
-
- Posts: 793
- Joined: Sun Nov 08, 2015 7:43 am
- Location: North Yorkshire UK
- Bike Model and Year: R1200RT 2011
- Been liked: 29 times
Re: RT Models & Specifications (UK)
David. wrote: The spec. of my Camhead is shown on the (used) sales invoice and written in the Rider's Manual.
This VIN Decoder https://www.mdecoder.com/ can be used to list the spec./accessories etc. but unfortunately doesn't say whether it's a Base, SE or LE model.
That link didn't work for me.
-
- Posts: 793
- Joined: Sun Nov 08, 2015 7:43 am
- Location: North Yorkshire UK
- Bike Model and Year: R1200RT 2011
- Been liked: 29 times
Re: RT Models & Specifications (UK)
Finally got the link to work with help from David, mine is really something special, it’s a Left Hand Drive version with the weight distribution biased for the UK cambered roads. Still don’t know what the model is though. I think the SE, LE stuff has been thought up by BMW UK as a marketing gimmick. Scold me if I’m wrong.
- David.
- Subscriber
- Posts: 8342
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 395 times
Re: RT Models & Specifications (UK)
Found this MCN Camhead review, https://www.motorcyclenews.com/bike-rev ... 00rt/2010/Our Gee wrote:Still don’t know what the model is though.
Only base model and SE version listed, no mentioned of an LE.
Last edited by David. on Sat Mar 13, 2021 11:08 am, edited 1 time in total.
-
- Subscriber
- Posts: 576
- Joined: Mon Mar 18, 2019 8:00 pm
- Location: Warwickshire
- Has liked: 61 times
- Been liked: 134 times
Re: RT Models & Specifications (UK)
Does anybody buy the base model?
Just looked on the Motorad UK website and a new model basic RT in white comes in at £15800. When you look at the specs it seems quite reasonably equipped.
Not sure how much an LE model with fancy paint would cost but would guess around another 4 grand.
Could I live without electronic suspension, gear assist pro (or whatever it's called) metallic paint and chromed bar ends? Yes, I think I could for a few thousand quid saving.
I would add tyre sensors sensors for peace of mind (even though I check them manually).
Just looked on the Motorad UK website and a new model basic RT in white comes in at £15800. When you look at the specs it seems quite reasonably equipped.
Not sure how much an LE model with fancy paint would cost but would guess around another 4 grand.
Could I live without electronic suspension, gear assist pro (or whatever it's called) metallic paint and chromed bar ends? Yes, I think I could for a few thousand quid saving.
I would add tyre sensors sensors for peace of mind (even though I check them manually).
- David.
- Subscriber
- Posts: 8342
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 395 times
Re: RT Models & Specifications (UK)
Make that another 5K, an LE is 19,105 + 1,740 for the Option 719 paint job = 20,845.MikeS wrote:Not sure how much an LE model with fancy paint would cost but would guess around another 4 grand.