Hand guards on r1200rt
- Doctor T
- Posts: 1998
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1152 times
- Been liked: 306 times
Hand guards on r1200rt
Hi Chaps. Heated grips are fine for my palm and inside fingers but the top of my hands are still cold from the wind. Has anyone fitted handguards?. Looks quite easy to fit as my 2007 has holes on both sides of the switchgear. Not looking for fancy Barkbuters but i think cheap Chinese eBay would do the job.
Last edited by Doctor T on Mon Jan 17, 2022 4:52 pm, edited 1 time in total.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx
Re: Hand guards on r1200rt
Sometimes called elephant ears, or handle bar muffs. Wunderlich makes them (expensive), Oxford Rain Seal (may no longer be available), or Hippo Hands.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
- David.
- Subscriber
- Posts: 8342
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 395 times
Re: Hand guards on r1200rt
Haven't fitted handguards myself but as the bike has the holes this might allow more options.Doctor T wrote:Has anyone fitted handguards. My 2007 has holes on both sides of the switchgear. Looking for cheap Chinese would do the job.
Have a look at AliExpress, they list some universal handguards for an R1200RT.
Last edited by David. on Tue Jan 18, 2022 11:38 am, edited 1 time in total.
- Doctor T
- Posts: 1998
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1152 times
- Been liked: 306 times
Re: Hand guards on r1200rt
Thanks for the input. I still think i will go down the handguard route. Never got on with handlebar Muffs. Tried them for a week when i was a London dispatch rider in the early 80's and hated them.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx
Re: Hand guards on r1200rt
You might want to try again, or at least look at the current version. It has been 40 years…
-
- Posts: 806
- Joined: Tue Jul 02, 2019 11:25 am
- Location: Basildon, Essex
- Bike Model and Year: NUFFINK
- Been liked: 327 times
Re: Hand guards on r1200rt
I was the same as you regards the muffs,hated them and felt really restricted(had guards on but they dont protect enough)So i have just bought a set of Barkbusters for my GSX1250 work bikeDoctor T wrote: Thanks for the input. I still think i will go down the handguard route. Never got on with handlebar Muffs. Tried them for a week when i was a London dispatch rider in the early 80's and hated them.
[size=2px]https://www.google.com/aclk?sa=l&ai=DCh ... EE4&adurl=[/size]
[size=2px]These look a lot more open and for the price they should keep the wind at bay.I'll let you know how they perform next week.[/size]
- Doctor T
- Posts: 1998
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1152 times
- Been liked: 306 times
Re: Hand guards on r1200rt
burridge01 wrote: I was the same as you regards the muffs,hated them and felt really restricted(had guards on but they dont protect enough)So i have just bought a set of Barkbusters for my GSX1250 work bike
https://www.google.com/aclk?sa=l&ai=DChcSEwio9YHp5bv1AhWN6-0KHTO3CZ0YABANGgJkZw&sig=AOD64_1p-jwdYlKsP8bqsfSMoKSMuZX_8Q&ctype=5&rct=j&q=&ved=2ahUKEwib4fjo5bv1AhUGAcAKHVlrC8YQww96BAgBEE4&adurl=
These look a lot more open and for the price they should keep the wind at bay.I'll let you know how they perform next week.
Bit dear for me but if they work i may be interested.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx
-
- Posts: 806
- Joined: Tue Jul 02, 2019 11:25 am
- Location: Basildon, Essex
- Bike Model and Year: NUFFINK
- Been liked: 327 times
Re: Hand guards on r1200rt
I got them 2nd hand £35 off Ebay,turned up today and they are semi rigid and to be fair they don't look to bad.Nothing like the muffs of yesteryear. Will get them on the gsx1250 at the weekend and ill let you know how they perform sometime next weekDoctor T wrote:
Bit dear for me but if they work i may be interested.
- Doctor T
- Posts: 1998
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1152 times
- Been liked: 306 times
Re: Hand guards on r1200rt
burridge01 wrote: I got them 2nd hand £35 off Ebay,turned up today and they are semi rigid and to be fair they don't look to bad.Nothing like the muffs of yesteryear. Will get them on the gsx1250 at the weekend and ill let you know how they perform sometime next week
With pics please
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx
-
- Posts: 806
- Joined: Tue Jul 02, 2019 11:25 am
- Location: Basildon, Essex
- Bike Model and Year: NUFFINK
- Been liked: 327 times
Re: Hand guards on r1200rt
Got them on the GSX1250 and they look ok,and i can get full lock(which i couldn't with universal guards)Got an early start tomorrow so will leg you know how they perform.
[size=2px][/size]
[size=2px]
[/size]
[size=2px][/size]
[size=2px]
[/size]
[size=2px][/size]
[size=2px]
[/size]
[size=2px][/size]
[size=2px][/size]
[size=2px]
[/size]
[size=2px][/size]
[size=2px]
[/size]
[size=2px][/size]
[size=2px]
[/size]
[size=2px][/size]
Re: Hand guards on r1200rt
Ok, my experience:Doctor T wrote: Bit dear for me but if they work i may be interested.
- Handguards - Do not do that much for keeping hands warm. Better than nothing I guess and protect against stones!
- Barkbuster Blizzards - Do take the worst of the wind chill away. Help keep hands warm whilst still allowing (almost) fully unhindered access and sight of all hand controls. - THE compromise solution.
- Full Muffs - The very best for warmth. A pocket of heated air is trapped in the muff (unlike the Blizzard). But the downside is you cannot see the hand controls and need to get used to operating everything by feel and knowledge.
Regarding the cost of the Blizzards, the sooner you buy them the cheaper they will be for each mile travelled! I have had mine a few years now and the cost per day is pennies. Not having cold hands could be priceless if it prevents an accident.
2020 R1250RT, 2021 Triton ST-125, 1960 SII Land Rover.
- Doctor T
- Posts: 1998
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1152 times
- Been liked: 306 times
Re: Hand guards on r1200rt
Now you have posted pictures i can see there not bulking at all. I spotted ones just like them on flee bay very much like them. They were about £20 from good old China. They seem to be Barkbuster rip off's.
Agree with TJRL regarding Full Muffs. That's is one of the reasons i don't like them. Ok on long distance but a pain with stop, start traffic
Agree with TJRL regarding Full Muffs. That's is one of the reasons i don't like them. Ok on long distance but a pain with stop, start traffic
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx
-
- Posts: 508
- Joined: Sat Oct 07, 2017 4:45 am
- Location: Oakland, California
- Has liked: 1 time
- Been liked: 9 times
Re: Hand guards on r1200rt
One of my complaints about my hexheads is that, for a bike built for touring, the fairing sends the wind right up your sleeves. I even screwed on some hard plastic deflectors to the mirror housing - until a strong side-wind popped both mirrors off the bike! Am I correct that the later models changed the fairing to give improved wind protection for the hands?