Bulbs
- Doctor T
- Posts: 1985
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1133 times
- Been liked: 304 times
Bulbs
Do Cambus error-free LED bulbs really work in our bikes?. I thinking of changing my stop, tail, and indicator bulbs. Am thinking of the change as they look brighter in the day light.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx
- Doctor T
- Posts: 1985
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1133 times
- Been liked: 304 times
Re: Bulbs
Anyone?
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx
- Doctor T
- Posts: 1985
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1133 times
- Been liked: 304 times
Re: Bulbs
Helpful but i really wanted to know it anyone had changed their stop/tail bulbs for LED and do these error free led really work on our bikes
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx
-
- Subscriber
- Posts: 1464
- Joined: Fri Sep 16, 2016 10:33 pm
- Location: Greater Manchester
- Bike Model and Year: RT 2011
- Has liked: 80 times
- Been liked: 143 times
Re: Bulbs
Doctor T wrote: Helpful but i really wanted to know it anyone had changed their stop/tail bulbs for LED and do these error free led really work on our bikes
Not Stop/Tail light bulbs, but I can't see it being different. I've changed the small side light bulbs in the headlight for Canbus compatible LED bulbs, it comes up on the dash that there's a forward facing bulb out/blown during the usual computer check sequence but once the bike starts it goes out and doesn't come back on. It does register in the ECU though when checking for fault codes with the GS9-11.
The GS 'is' the better bike :-)
- Doctor T
- Posts: 1985
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1133 times
- Been liked: 304 times
Re: Bulbs
Cheers Simbo
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx
- Steve398
- Subscriber
- Posts: 922
- Joined: Thu Jul 11, 2019 8:41 pm
- Location: West Sussex, UK
- Bike Model and Year: R1200RTLC, 2018
- Has liked: 417 times
- Been liked: 343 times
Re: Bulbs
I know this may seem off topic but...
When I changed all the bulbs on my Honda ST1300 for LEDs (except the headlights), I had to fit red LEDs for the tail and brake light and amber on the indicators because the new LED bulbs were such a bright and powerful light source that it overpowered the colouring on the lens and would virtually show a white light if non-coloured bulbs were fitted.
I agree completely with David, ADB were very helpful when I was researching the idea.
When I changed all the bulbs on my Honda ST1300 for LEDs (except the headlights), I had to fit red LEDs for the tail and brake light and amber on the indicators because the new LED bulbs were such a bright and powerful light source that it overpowered the colouring on the lens and would virtually show a white light if non-coloured bulbs were fitted.
I agree completely with David, ADB were very helpful when I was researching the idea.
Cum Dubito Desisto