I was sent this and asked to post it here.
Torque Wrench
- Doctor T
- Posts: 1985
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1133 times
- Been liked: 304 times
Re: Torque Wrench
I use Tang tools wrenches. Although bought many years ago they cover every job i need them for. Every 5 years i give them to the local test dealer(truck) who gets them recalibrated. May cheap wrenches go out of calibration quickly. To me especially on wheel nuts could mean life or death.
My advice would be to only by from a know manufacturer and not some eBay cheapie
My advice would be to only by from a know manufacturer and not some eBay cheapie
Last edited by Doctor T on Sat Dec 31, 2022 2:28 pm, edited 1 time in total.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx
- Steve398
- Subscriber
- Posts: 922
- Joined: Thu Jul 11, 2019 8:41 pm
- Location: West Sussex, UK
- Bike Model and Year: R1200RTLC, 2018
- Has liked: 417 times
- Been liked: 343 times
Re: Torque Wrench
Just found these two Teng Tools digital torque wrenches -
Teng Tools Torque Wrench Plus 3/8" 20-100Nm @ £75
https://www.toolstoday.co.uk/teng-tools ... TUQAvD_BwE
Teng Tools Torque Wrench Plus 1/2" 40-200Nm @ £79
https://www.toolstoday.co.uk/teng-tools ... AvD_BwEYep
I’ve used Teng tools in the past with no problems and these are probably far more accurate than my old torque wrench.
Teng Tools Torque Wrench Plus 3/8" 20-100Nm @ £75
https://www.toolstoday.co.uk/teng-tools ... TUQAvD_BwE
Teng Tools Torque Wrench Plus 1/2" 40-200Nm @ £79
https://www.toolstoday.co.uk/teng-tools ... AvD_BwEYep
I’ve used Teng tools in the past with no problems and these are probably far more accurate than my old torque wrench.
Cum Dubito Desisto