Cost to fit brake pads
-
- Subscriber
- Posts: 569
- Joined: Mon Mar 18, 2019 8:00 pm
- Location: Warwickshire
- Has liked: 56 times
- Been liked: 127 times
Cost to fit brake pads
Waiting for a call back from main dealer regarding a price to fit rear brake pads. What has been other people experience?
I'm guessing it'll be around 150-200 quid.
I'm guessing it'll be around 150-200 quid.
- Steve398
- Subscriber
- Posts: 923
- Joined: Thu Jul 11, 2019 8:41 pm
- Location: West Sussex, UK
- Bike Model and Year: R1200RTLC, 2018
- Has liked: 419 times
- Been liked: 344 times
Re: Cost to fit brake pads
You could do it yourself, not a big job... OEM pads a bit pricey but you could use EBC or Brembo?
Cum Dubito Desisto
-
- Posts: 797
- Joined: Tue Jul 02, 2019 11:25 am
- Location: Basildon, Essex
- Bike Model and Year: NUFFINK
- Been liked: 321 times
-
- Posts: 126
- Joined: Wed Jun 23, 2021 6:44 pm
- Location: Worcestershire
- Bike Model and Year: 2020 R1250RT LE
- Has liked: 13 times
- Been liked: 16 times
-
- Subscriber
- Posts: 569
- Joined: Mon Mar 18, 2019 8:00 pm
- Location: Warwickshire
- Has liked: 56 times
- Been liked: 127 times
Re: Cost to fit brake pads
No I'd go with an independent, the place that does my tyres. However, I'm hoping to be surprised by BMW and it costs nothing to ask. If they charged a little bit more than the independent then I'd go to BMW.
Can I fit them myself? I've all the mechanical aptitude of a chimpanzee and prefer to leave it to somebody that knows what they're doing.
- Steve398
- Subscriber
- Posts: 923
- Joined: Thu Jul 11, 2019 8:41 pm
- Location: West Sussex, UK
- Bike Model and Year: R1200RTLC, 2018
- Has liked: 419 times
- Been liked: 344 times
Re: Cost to fit brake pads
I’m frequently surprised by BMW pricesMikeS wrote: ↑Tue Oct 04, 2022 2:18 pmNo I'd go with an independent, the place that does my tyres. However, I'm hoping to be surprised by BMW and it costs nothing to ask. If they charged a little bit more than the independent then I'd go to BMW.
Can I fit them myself? I've all the mechanical aptitude of a chimpanzee and prefer to leave it to somebody that knows what they're doing.
Cum Dubito Desisto
Re: Cost to fit brake pads
Just had a set of pads fitted to one of our fleet bikes. Pads and spring plate (which they quite often change at the same time) £62 (with 10% discount). Fitting was free. But fitting rear pads is very easy and a 15min job if you take your time.
-
- Subscriber
- Posts: 569
- Joined: Mon Mar 18, 2019 8:00 pm
- Location: Warwickshire
- Has liked: 56 times
- Been liked: 127 times
Re: Cost to fit brake pads
Turns out 200 quid estimate was very pessimistic.
No call back from North Oxford so rang Cotswold Motorrad.
70 quid fitted including new caliper bolts.
No call back from North Oxford so rang Cotswold Motorrad.
70 quid fitted including new caliper bolts.
- Doctor T
- Posts: 1988
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1136 times
- Been liked: 304 times
Re: Cost to fit brake pads
If you know what you're doing, you can have the front and rear fitted within 30 minutes. It's one of the easy jobs to do
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx
-
- Posts: 15
- Joined: Wed Jul 06, 2016 1:50 pm
- Location: Parksville BC
- Been liked: 2 times
Re: Cost to fit brake pads
Yes its a simple task, but in the video one important step was missed. You know that these rear brakes are called floating calipers. What this means is the caliper is attached to a bracket. The bracket is attached to the rear axle. So now when you apply the brakes the two pistons push the outboard pad against the rotor. When this happens the caliper then slides on the pins to engage the inboard pad against the rotor. If those pins are not serviced to make sure they slide easily, they will eventually seize and let me tell you, you will be in for a whole lot of hurt. BMW has made sure that what should be a replaceable part is not, and if you cannot unseize those pins, its a whole new caliper. I can tell you this from experience. After much penetrating oil and heat applications I got my apart. Took two days. By then the rubber boots where shot. BMW wanted $65 for those two tiny rubber boots. Managed to find a Dorman part that was identical for $11. So make sure those pins are lubed and slide easy.
-
- Posts: 117
- Joined: Sun Sep 04, 2022 2:50 am
- Location: Queensland, Australia
- Bike Model and Year: R1200RT 2011 MOD
- Has liked: 76 times
- Been liked: 17 times
Re: Cost to fit brake pads
Excellent detective work!
Are these rubber boots identical across models or peculiar to wetheads only for example?
Regardless of model compatibility, many could benefit from your expertise...
Do you have:
a) The Dorman part number, or
b) A reference to the Dorman model of which rubber boot was a part?
Many thanks for your post.
Are these rubber boots identical across models or peculiar to wetheads only for example?
Regardless of model compatibility, many could benefit from your expertise...
Do you have:
a) The Dorman part number, or
b) A reference to the Dorman model of which rubber boot was a part?
Many thanks for your post.
2011 R1200RT Highly Modified
-
- Posts: 15
- Joined: Wed Jul 06, 2016 1:50 pm
- Location: Parksville BC
- Been liked: 2 times
Re: Cost to fit brake pads
Whoops I was wrong, its not Dorman, but a Carlson brake part # 16165. It's a kit which by the way comes with 4 rubber boots.