Hi, I want to fit an extra brake lamp under the number plate. It's a 2007 model. The lamp is LED and am thinking of tapping into the rear light wires.
Will the cambus be affected each time i brake?. I've never fitted extra lights on a cambus bike before so i thought of asking the knowledgeable people on here first before i go soldering wires.
Extra brake lamp.
-
Doctor T
- Posts: 1998
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1152 times
- Been liked: 306 times
Extra brake lamp.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx
-
Randyjaco
- Posts: 225
- Joined: Thu Nov 11, 2021 3:18 am
- Location: Friendswood, Texas, USA
- Bike Model and Year: R1200RT 2017
- Has liked: 53 times
- Been liked: 46 times
Re: Extra brake lamp.
I was able to do it on my ST, so it will probably work. Let us know if it works on yours. I am planing to do the same on my RT
-
David.
- Subscriber
- Posts: 8342
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 395 times
Re: Extra brake lamp.
Understanding The BMW Motorcycle CANBUS System, Understanding The BMW Motorcycle CANBUS System - YouTubeDoctor T wrote:Will the CAN-bus be affected.
Last edited by David. on Tue Jan 25, 2022 9:56 am, edited 1 time in total.
-
David.
- Subscriber
- Posts: 8342
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 395 times
Re: Extra brake lamp.
The brake lamp bulb holders have spade connections, could always use these.Doctor T wrote:Before I go soldering wires.
-
Doctor T
- Posts: 1998
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1152 times
- Been liked: 306 times
Re: Extra brake lamp.
Cheers David. I subscribe to Tinderboxarts on YT but i missed this one.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx
-
Randyjaco
- Posts: 225
- Joined: Thu Nov 11, 2021 3:18 am
- Location: Friendswood, Texas, USA
- Bike Model and Year: R1200RT 2017
- Has liked: 53 times
- Been liked: 46 times
Re: Extra brake lamp.
I got my modulated brake light and started to install it yesterday. I stopped upon noteing how much Tupperware that had to be removed in order to get to the brake light. My new RT is fast becoming my least favorite motorcycle to work on. I am just going to wait until I do my annual service. B^(
I will be looking forward to hear about your success
I will be looking forward to hear about your success
-
Marvin2Shoes
- Posts: 117
- Joined: Sun Sep 04, 2022 2:50 am
- Location: Queensland, Australia
- Bike Model and Year: R1200RT 2011 MOD
- Has liked: 76 times
- Been liked: 17 times
Re: Extra brake lamp.
No tupperware on the 2011 model (they couldn'tbethat much different could they?)... just two screws, one on either side of the tail light housing on the 2011 model....
- 20221119_171816.jpg (273.97 KiB) Viewed 820 times
2011 R1200RT Highly Modified
-
michaelc2710
- Subscriber
- Posts: 580
- Joined: Wed Feb 22, 2017 11:31 pm
- Location: Greater Manchester
- Has liked: 51 times
- Been liked: 66 times