Is it worth it ?
-
- Posts: 379
- Joined: Sat Aug 04, 2018 11:43 am
- Location: UK
- Bike Model and Year: 2019 1250rtle
- Been liked: 20 times
Is it worth it ?
Lately i find that after an hour or so on the bike my neck and back ache , thinking about fitting a riser kit and lower pegs has anyone invested in these on their own BMW RT ? any advice is welcome.
- AlreadyReadyAlready
- Posts: 10
- Joined: Tue Feb 15, 2022 5:41 pm
- Location: Oxnard, CA
- Bike Model and Year: R1200RT 2018
- Has liked: 13 times
- Been liked: 6 times
-
- Subscriber
- Posts: 1464
- Joined: Fri Sep 16, 2016 10:33 pm
- Location: Greater Manchester
- Bike Model and Year: RT 2011
- Has liked: 80 times
- Been liked: 143 times
Re: Is it worth it ?
I've got 1" bar risers and the peg lowering kit on my RT, they didn't make a massive difference, but I'd buy them again.
The GS 'is' the better bike :-)
- David.
- Subscriber
- Posts: 8300
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 387 times
- Randyjaco
- Posts: 224
- Joined: Thu Nov 11, 2021 3:18 am
- Location: Friendswood, Texas, USA
- Bike Model and Year: R1200RT 2017
- Has liked: 53 times
- Been liked: 46 times
Re: Is it worth it ?
These work for me and they are cheaper. The trick is getting the old ones off
- Attachments
-
- Screenshot 2022-10-31 8.23.11 PM.png (253.87 KiB) Viewed 988 times
-
- Posts: 117
- Joined: Sun Sep 04, 2022 2:50 am
- Location: Queensland, Australia
- Bike Model and Year: R1200RT 2011 MOD
- Has liked: 76 times
- Been liked: 17 times
Re: Is it worth it ?
I have a set of bar risers if anybody wants them... personally I'd rather cut away my fairing and attach some clamp on bars to make my chin-on-tank-bag lying position even more comfortable.
2011 R1200RT Highly Modified
- Steve398
- Subscriber
- Posts: 922
- Joined: Thu Jul 11, 2019 8:41 pm
- Location: West Sussex, UK
- Bike Model and Year: R1200RTLC, 2018
- Has liked: 417 times
- Been liked: 343 times
Re: Is it worth it ?
I fitted a riders footrest lowering kit as I found the standard position caused my legs to ache on long runs. For me it was a massive improvement considering the small amount they actually lower and move the pegs forward.
I considered handlebar risers, but decided it was too much effort and cost to change a riding position that I already found comfortable.
I considered handlebar risers, but decided it was too much effort and cost to change a riding position that I already found comfortable.
Cum Dubito Desisto
-
- Posts: 117
- Joined: Sun Sep 04, 2022 2:50 am
- Location: Queensland, Australia
- Bike Model and Year: R1200RT 2011 MOD
- Has liked: 76 times
- Been liked: 17 times
Re: Is it worth it ?
I'd like to convert my (lowered) pillion pegs to main pegs with a rear set and give myself the full forward position I find very comfortable. Lying face first on the tank bag really makes best use of the cruise control.
2011 R1200RT Highly Modified
- Doctor T
- Posts: 1985
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1133 times
- Been liked: 304 times
Re: Is it worth it ?
I got the same feeling before i added raises to my 07. Raised up and backward helped a lot. The problem i have is the height of the peg position. They need lowing even for my short legs but the cost of the lowing adapters is our of my range.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx
- Steve398
- Subscriber
- Posts: 922
- Joined: Thu Jul 11, 2019 8:41 pm
- Location: West Sussex, UK
- Bike Model and Year: R1200RTLC, 2018
- Has liked: 417 times
- Been liked: 343 times
Re: Is it worth it ?
Cum Dubito Desisto