On the clutch side, the radiator hose sits on the head of the bolt. Am I doing something wrong? Any way to prevent this?
- BECE5F34-282B-4E42-B3FC-D125D6C58B68.jpeg (619.41 KiB) Viewed 587 times
Fitting Ztechnik engine protection
-
Sacowan
- Posts: 10
- Joined: Thu Apr 07, 2022 5:37 am
- Location: NorBay, NorCal
- Bike Model and Year: 2020/RT
- Has liked: 3 times
- Been liked: 2 times
Fitting Ztechnik engine protection
Mounting Ztechnik engine protection to my 2020 1250rt.
On the clutch side, the radiator hose sits on the head of the bolt. Am I doing something wrong? Any way to prevent this?
On the clutch side, the radiator hose sits on the head of the bolt. Am I doing something wrong? Any way to prevent this?
Ain’t no right way to do the wrong thing.
-
Glenn
- Subscriber
- Posts: 393
- Joined: Sat Jan 15, 2022 7:49 pm
- Location: Shropshire
- Bike Model and Year: R1250RT LE 2019
- Has liked: 43 times
- Been liked: 146 times
Re: Fitting Ztechnik engine protection
Fig 8 here looks similar to what you have https://www.nationalcycle.com/media/wys ... 57-000.pdf
-
simbo
- Subscriber
- Posts: 1480
- Joined: Fri Sep 16, 2016 10:33 pm
- Location: Greater Manchester
- Bike Model and Year: RT 2011
- Has liked: 81 times
- Been liked: 147 times
Re: Fitting Ztechnik engine protection
I'd fit a Dome headed allen bolt so it's more rounded and flush.
The GS 'is' the better bike :-)
-
David.
- Subscriber
- Posts: 8342
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 395 times
Re: Fitting Ztechnik engine protection
Don't think so, just looks like the spacer is bringing the allen head bolt closer to the radiator hose.
-
David.
- Subscriber
- Posts: 8342
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 395 times
Re: Fitting Ztechnik engine protection
An alternative to simbo's suggestion is a flanged button screw which doesn't need a washer.
