Footpeg lowing kit 2007 - 2013 models

Looking for Aftermarket parts and Accessories for your BMW R1200RT/R1250RT or found something useful you want to share? Or just a general question?
User avatar
Doctor T
Posts: 1990
Joined: Tue Dec 21, 2021 10:21 pm
Location: west sussex
Bike Model and Year: 2007 R1200RT SE
Has liked: 1137 times
Been liked: 305 times
Great Britain

Footpeg lowing kit 2007 - 2013 models

Post by Doctor T »

Took a chance and bought a rider's footpeg lowing kit from Aliexpress. The cost with the discount coupon was £35.00 with a 15 day delivery, Came in 10 days.
They look well made and may be made from Billet Alloy as i can see tooling marks. The kit comes with lots of Allen bolts,washers, and new cotter pins.
For my 2007 RT, i had loads of bolts, washers,s etc left over. The leftover i guess are for the 2010 to 2013 models. They drop the pegs by 30mm.
As for strength. I put my full weight(16.5St) on each peg once they were fitted and jumped up and down. They passed that test
This kit came with the Usual Wunderlich destructions. The Wunderlich name and logo blanked out.
Easy-fitted within an hour and with a quick ride out found i don't need to adjust the gear and brake levers.
91448.jpg
91448.jpg (17.26 KiB) Viewed 1708 times
Picture not from my bike but the same article.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
burridge01
Posts: 799
Joined: Tue Jul 02, 2019 11:25 am
Location: Basildon, Essex
Bike Model and Year: NUFFINK
Been liked: 323 times
Great Britain

Re: Footpeg lowing kit 2007 - 2013 models

Post by burridge01 »

Welcome to the Chinese lower club :mrgreen:
User avatar
Doctor T
Posts: 1990
Joined: Tue Dec 21, 2021 10:21 pm
Location: west sussex
Bike Model and Year: 2007 R1200RT SE
Has liked: 1137 times
Been liked: 305 times
Great Britain

Re: Footpeg lowing kit 2007 - 2013 models

Post by Doctor T »

After fitting a GPS mount, Crashbars F & R, and now the lowing kit. These are all Wunderlich china copies am doing pretty well and saving money.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
burridge01
Posts: 799
Joined: Tue Jul 02, 2019 11:25 am
Location: Basildon, Essex
Bike Model and Year: NUFFINK
Been liked: 323 times
Great Britain

Re: Footpeg lowing kit 2007 - 2013 models

Post by burridge01 »

I get loads of stuff for all my bikes from China.Won't lie,the odd bit has needed fettling,but overall I've no complaints.
User avatar
Doctor T
Posts: 1990
Joined: Tue Dec 21, 2021 10:21 pm
Location: west sussex
Bike Model and Year: 2007 R1200RT SE
Has liked: 1137 times
Been liked: 305 times
Great Britain

Re: Footpeg lowing kit 2007 - 2013 models

Post by Doctor T »

Forgot the chinalich bar raisers. Again well made but i used bolts of a known quality
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
Ed Harley
Posts: 166
Joined: Wed Mar 17, 2021 3:36 am
Bike Model and Year: 2013 R1200RT
Has liked: 11 times
Been liked: 58 times
Finland

Re: Footpeg lowing kit 2007 - 2013 models

Post by Ed Harley »

Do you feel that this lowering kit helps?

I'm 6'2" and even with RT with seat at highest position I start to feel my hips and knees after a while. And I have no problems otherwise with either.

If a 30 mm drop really helps - and if they do not drag in turns - then that might be worth considering.
1983 GS1000G | 1984 GSX1100EF | 1997 FLHR | 1998 FLSTS | 1999 R1100RT | 2016 Triumph 1200 XRT
burridge01
Posts: 799
Joined: Tue Jul 02, 2019 11:25 am
Location: Basildon, Essex
Bike Model and Year: NUFFINK
Been liked: 323 times
Great Britain

Re: Footpeg lowing kit 2007 - 2013 models

Post by burridge01 »

Ed Harley wrote: Thu Jan 19, 2023 4:24 pm Do you feel that this lowering kit helps?

I'm 6'2" and even with RT with seat at highest position I start to feel my hips and knees after a while. And I have no problems otherwise with either.

If a 30 mm drop really helps - and if they do not drag in turns - then that might be worth considering.
I'm an inch taller than you and whilst I've not ridden the bike a great distance(accident)I found the position way better.I also have a raised seat which helps with the angle.
Ed Harley
Posts: 166
Joined: Wed Mar 17, 2021 3:36 am
Bike Model and Year: 2013 R1200RT
Has liked: 11 times
Been liked: 58 times
Finland

Re: Footpeg lowing kit 2007 - 2013 models

Post by Ed Harley »

Thanks. :cheers:

Something to consider. But there is no way I would spend almost 300,- for a Wunderlich kit. Maybe something from the East if the quality is good.
1983 GS1000G | 1984 GSX1100EF | 1997 FLHR | 1998 FLSTS | 1999 R1100RT | 2016 Triumph 1200 XRT
Ed Harley
Posts: 166
Joined: Wed Mar 17, 2021 3:36 am
Bike Model and Year: 2013 R1200RT
Has liked: 11 times
Been liked: 58 times
Finland

Re: Footpeg lowing kit 2007 - 2013 models

Post by Ed Harley »

Doctor T wrote: Tue Jan 17, 2023 2:34 pm Took a chance and bought a rider's footpeg lowing kit from Aliexpress. The cost with the discount coupon was £35.00 with a 15 day delivery, Came in 10 days.
Which item did you get, if you don't mind me asking? Could you by any chance give a link as I'm quite unfamiliar with this Alithingy?
1983 GS1000G | 1984 GSX1100EF | 1997 FLHR | 1998 FLSTS | 1999 R1100RT | 2016 Triumph 1200 XRT
User avatar
Doctor T
Posts: 1990
Joined: Tue Dec 21, 2021 10:21 pm
Location: west sussex
Bike Model and Year: 2007 R1200RT SE
Has liked: 1137 times
Been liked: 305 times
Great Britain

Re: Footpeg lowing kit 2007 - 2013 models

Post by Doctor T »

https://www.aliexpress.com/item/1005004 ... 1802mth64s

In the icy weather, we have in the UK at the moment, i don't feel like trying to scratch the pegs. I've tried to in warmer days and didn't touch the pegs on tight turns.
Haven't really had the time for a 1hr plus ride to test the set up due to the above. But by just sitting on the bike and a ride around the block, my legs seem in a better position. I too get hip lock on long rides so fingers crossed these will work.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
Ed Harley
Posts: 166
Joined: Wed Mar 17, 2021 3:36 am
Bike Model and Year: 2013 R1200RT
Has liked: 11 times
Been liked: 58 times
Finland

Re: Footpeg lowing kit 2007 - 2013 models

Post by Ed Harley »

Thanks, I'll have a look at Aliexpress - will be my first time. Who knows, might find the hand guards from there too. :cheers:
1983 GS1000G | 1984 GSX1100EF | 1997 FLHR | 1998 FLSTS | 1999 R1100RT | 2016 Triumph 1200 XRT
User avatar
Doctor T
Posts: 1990
Joined: Tue Dec 21, 2021 10:21 pm
Location: west sussex
Bike Model and Year: 2007 R1200RT SE
Has liked: 1137 times
Been liked: 305 times
Great Britain

Re: Footpeg lowing kit 2007 - 2013 models

Post by Doctor T »

You will find hand guards at a lot lower price. Ive used the site for many years. I have found it a safe place to pay.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
Ed Harley
Posts: 166
Joined: Wed Mar 17, 2021 3:36 am
Bike Model and Year: 2013 R1200RT
Has liked: 11 times
Been liked: 58 times
Finland

Re: Footpeg lowing kit 2007 - 2013 models

Post by Ed Harley »

That is good to know. Paypal will give additional peace of mind. :cheers:
1983 GS1000G | 1984 GSX1100EF | 1997 FLHR | 1998 FLSTS | 1999 R1100RT | 2016 Triumph 1200 XRT
Ed Harley
Posts: 166
Joined: Wed Mar 17, 2021 3:36 am
Bike Model and Year: 2013 R1200RT
Has liked: 11 times
Been liked: 58 times
Finland

Re: Footpeg lowing kit 2007 - 2013 models

Post by Ed Harley »

Bah! There was no Paypal option but i ordered those today anyway.

I'm about 250 lbs on a good day so if they take my old bones (heavy) they take anything. :mrgreen:
1983 GS1000G | 1984 GSX1100EF | 1997 FLHR | 1998 FLSTS | 1999 R1100RT | 2016 Triumph 1200 XRT
User avatar
Doctor T
Posts: 1990
Joined: Tue Dec 21, 2021 10:21 pm
Location: west sussex
Bike Model and Year: 2007 R1200RT SE
Has liked: 1137 times
Been liked: 305 times
Great Britain

Re: Footpeg lowing kit 2007 - 2013 models

Post by Doctor T »

Am short, fat, and hairy 240lbs so you shouldn't have any problem. Perhaps it's a country thing but on the check out there was PayPal.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
Post Reply