part number needed
-
Doctor T
- Posts: 1997
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1148 times
- Been liked: 306 times
part number needed
I need the part number for a front wheel bearing seal. The bike is a 07 RT
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx
-
David.
- Subscriber
- Posts: 8325
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 393 times
Re: part number needed
I find MAX BMW, https://shop.maxbmw.com/fiche/DiagramsM ... d=09082020 more user friendly than RealOEM.
(Usually get the part # from MAX BMW and crosscheck it with RealOEM).
Which seal do you need, left or right, they have different ID.
Left 35mm ID, https://www.motorworks.co.uk/wheel-bear ... 626-2.html
Right 30mm ID, https://www.motorworks.co.uk/wheel-oil- ... 625-1.html
Is this the seal required, if so, looks like it could be the left 35 x 52 x 7 which is shown on the seal. (The right is 30 x 52 x 7).
(Usually get the part # from MAX BMW and crosscheck it with RealOEM).
Which seal do you need, left or right, they have different ID.
Left 35mm ID, https://www.motorworks.co.uk/wheel-bear ... 626-2.html
Right 30mm ID, https://www.motorworks.co.uk/wheel-oil- ... 625-1.html
Is this the seal required, if so, looks like it could be the left 35 x 52 x 7 which is shown on the seal. (The right is 30 x 52 x 7).
-
Doctor T
- Posts: 1997
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1148 times
- Been liked: 306 times
Re: part number needed
Thanks for the help Chaps 
.
I need both David. I received a message from the shop and he is sending the correct ones out on Monday. I sent him the part numbers and sizes to make sure i received the correct ones this time.
Thank you both again
.I need both David. I received a message from the shop and he is sending the correct ones out on Monday. I sent him the part numbers and sizes to make sure i received the correct ones this time.
Thank you both again
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx