Suspension Set Up?

Having Problems with your BMW R1200RT/R1250RT? or have some Maintenance and Service questions?
User avatar
Randyjaco
Posts: 225
Joined: Thu Nov 11, 2021 3:18 am
Location: Friendswood, Texas, USA
Bike Model and Year: R1200RT 2017
Has liked: 53 times
Been liked: 46 times
United States of America

Suspension Set Up?

Post by Randyjaco »

My 2017 RT (with 17k miles) is running fine at the moment, but I a curious about the suspension set up. At times when I get into the twisties at high speed, the suspension gets a little squirrelly. I was looking at the manual and I notice that there is no section on setting up the suspension? How does one check to see if the suspension is set up optimally?

The tires are relatively new Road 6`s and they are at the recommended pressures.
User avatar
Stu
Administrator
Posts: 1598
Joined: Wed Jun 02, 2021 9:13 pm
Location: Hull, UK
Bike Model and Year: 2016 R1200RT
Has liked: 559 times
Been liked: 519 times
Great Britain

Re: Suspension Set Up?

Post by Stu »

I'm guessing that you don't have ESA?
User avatar
Steve398
Subscriber
Posts: 926
Joined: Thu Jul 11, 2019 8:41 pm
Location: West Sussex, UK
Bike Model and Year: R1200RTLC, 2018
Has liked: 424 times
Been liked: 348 times
Isle of Wight

Re: Suspension Set Up?

Post by Steve398 »

Have you checked your suspension for leaks etc? I have a 2018 with 24000 miles on it and had the shocks replaced last year with TracTive units as the front was leaking and the rear was a bit soft.
From what I remember the standard BMW units only carry a 3 year warranty.
Cum Dubito Desisto
User avatar
Randyjaco
Posts: 225
Joined: Thu Nov 11, 2021 3:18 am
Location: Friendswood, Texas, USA
Bike Model and Year: R1200RT 2017
Has liked: 53 times
Been liked: 46 times
United States of America

Re: Suspension Set Up?

Post by Randyjaco »

sakm wrote: Wed Mar 22, 2023 3:22 pm I'm guessing that you don't have ESA?
It's got ESA and there are no faults showing up on my GS911. I typically run it on Normal and Dynamic. So do I just assume that some guy at the BMW factory provided the optimum set up for me and my gear?
Visual inspection indicates no leaks or damage.
My weight with gear @200 lbs
Saddlebags with contents @35 lbs.
User avatar
Stu
Administrator
Posts: 1598
Joined: Wed Jun 02, 2021 9:13 pm
Location: Hull, UK
Bike Model and Year: 2016 R1200RT
Has liked: 559 times
Been liked: 519 times
Great Britain

Re: Suspension Set Up?

Post by Stu »

On that basis I was thinking exactly the same thing while I was out and about the other day!

Although I must say I think mine is well sprung and setup OK for me

I thought you was asking how to set it up at first which you can't do! It's either soft normal or dynamic! No in between
User avatar
7vwh
Subscriber
Posts: 265
Joined: Thu Jul 31, 2014 9:16 pm
Location: East Yorkshire, UK
Bike Model and Year: R1200RT 2014
Has liked: 16 times
Been liked: 40 times
Great Britain

Re: Suspension Set Up?

Post by 7vwh »

Could it be that your speed maybe just a little too high for the twisties and you’re over testing the suspension and tyre grip?
User avatar
Randyjaco
Posts: 225
Joined: Thu Nov 11, 2021 3:18 am
Location: Friendswood, Texas, USA
Bike Model and Year: R1200RT 2017
Has liked: 53 times
Been liked: 46 times
United States of America

Re: Suspension Set Up?

Post by Randyjaco »

7vwh wrote: Wed Mar 22, 2023 11:10 pm Could it be that your speed maybe just a little too high for the twisties and you’re over testing the suspension and tyre grip?
That is a definite possibility :o I do like to test my limits and the bike runs like a spotted ape :-D
All my previous bikes required a suspension set up procedure, so that is why I ask.
User avatar
David.
Subscriber
Posts: 8342
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 395 times
Great Britain

Re: Suspension Set Up?

Post by David. »

With a payload of 235 lbs (approx. 17 st), what is the suspension pre-load set at. Solo mode with luggage should cover it.

The BMW weight guidelines are based on a rider being between 8 st to 13 st, with an average of 11 st.

Image
Last edited by David. on Thu Mar 23, 2023 10:08 am, edited 2 times in total.
User avatar
Steve398
Subscriber
Posts: 926
Joined: Thu Jul 11, 2019 8:41 pm
Location: West Sussex, UK
Bike Model and Year: R1200RTLC, 2018
Has liked: 424 times
Been liked: 348 times
Isle of Wight

Re: Suspension Set Up?

Post by Steve398 »

David. wrote: Thu Mar 23, 2023 4:07 am With a payload of 235 lbs (approx. 17 st), what is the suspension pre-load set at.

The BMW weight guidelines are based on a rider being between 8 st to 13 st, with an average of 11 st.
Yeah, that makes sense for a ‘touring’ bike! :lol: :lol:

I’m 13st naked (not a pretty sight) but with full kit on probably a stone or two heavier and considered skinny by my mates.. so on tour 2-up with a months worth of kit?
Unrealistic, I wonder how many on this forum are 8-13st to conform to BMW’s baseline?

I’m aware of the suspension option display David, but if you start with an unrealistic base line then everything else will follow.
Last edited by Steve398 on Thu Mar 23, 2023 10:15 am, edited 3 times in total.
Cum Dubito Desisto
User avatar
David.
Subscriber
Posts: 8342
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 395 times
Great Britain

Re: Suspension Set Up?

Post by David. »

The max. payload is (232 kg) 36.5 st.
User avatar
David.
Subscriber
Posts: 8342
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 395 times
Great Britain

Re: Suspension Set Up?

Post by David. »

Steve398 wrote: Thu Mar 23, 2023 10:03 amI wonder how many on this forum are 8-13st to conform to BMW’s baseline.
Should I create a poll.
User avatar
Steve398
Subscriber
Posts: 926
Joined: Thu Jul 11, 2019 8:41 pm
Location: West Sussex, UK
Bike Model and Year: R1200RTLC, 2018
Has liked: 424 times
Been liked: 348 times
Isle of Wight

Re: Suspension Set Up?

Post by Steve398 »

If you want to..
Cum Dubito Desisto
User avatar
David.
Subscriber
Posts: 8342
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 395 times
Great Britain

Re: Suspension Set Up?

Post by David. »

User avatar
David.
Subscriber
Posts: 8342
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 395 times
Great Britain

Re: Suspension Set Up?

Post by David. »

Randyjaco wrote: Wed Mar 22, 2023 2:20 pmHow does one check to see if the suspension is set up optimally.
http://www.eilenberger.net/Suspension/suspension.htm

This video shows how to measure the F&R sag on a sports bike but gives an idea of what it's all about.

User avatar
Randyjaco
Posts: 225
Joined: Thu Nov 11, 2021 3:18 am
Location: Friendswood, Texas, USA
Bike Model and Year: R1200RT 2017
Has liked: 53 times
Been liked: 46 times
United States of America

Re: Suspension Set Up?

Post by Randyjaco »

Thanks. This is my first bike with ESA. So does the ESA eliminate any need to set up the rear suspension by doing the calculations whenever you are riding?
It just seems that the ESA would perform optimally if the actual sag is initially set to the actual rider/weight.
Post Reply