BMW driveshaft recall/problems & preventative maintenance

[burridge01]

You are correct.

[Casbar]

I was with a chap who had a failure, does that count?

[Stu]

Any failures count! a failure is a failure regardless of who or where they are

I am more interested in why they fail and trying to prevent that

From images I have seen of failures it seems to be the UJ's that let go whether this is due to seized splines is anyone's guess

[David.]

I am more interested in why they fail and trying to prevent that.

viewtopic.php?p=54184&hilit=drive+shaft+failures#p54184

Could always email Robbert surveybmwdriveshaft@ziggo.nl and ask how he got on with his survey.

"The assignment will cover common failures of the drive-shaft of BMW R1200 model motorcycles. It will contain an analysis of the failure modes, a root cause analyse and when possible advise how to prevent these failures."

[Steve398]

It’s a shame not being able to trust a motorcycle whilst on a trip. I’ve had my first bmw 1250rt for almost a year now and it’s been a rocky road after 16 years with a Honda ST1300

Hmmm… for me it’s not a question of trusting the BMW over the 5k miles of our proposed trip. It’s more of a belt and braces thing of it being miles from home in Greece with dubious dealer coverage and a possibility of something going wrong and the costs involved.

Do I trust the bike? Yeah, if I didn’t I wouldn’t be going, but as much as any piece of machinery it can go wrong.

Is that worth £100’s worth of cover-all insurance for relative peace of mind? Absolutely!

[burridge01]

Steve,if you don't mind me asking,what's the cover you've taken out.

[Steve398]

https://www.eurobreakdown.com

£95.99 for single trip Gold cover.

95112928-7CAB-41A1-8D29-B8A92200F8EE.png (284.16 KiB) Viewed 1838 times

[Steve398]

In respect of ‘what is covered?’

D69843F2-1C08-45C8-BB14-3BA061BF866A.png (266.65 KiB) Viewed 1839 times

[burridge01]

Thanks for that Steve,that looks very good value indeed.Have you/anyone used it before.Ive got full RAC European cover,that would be a great addition, especially the garage costs.

[Steve398]

It came off the UKGSER site where it was recommended there. Happily I have had no need to use it so far.

However here’s some of their reviews -

https://www.eurobreakdown.com/reviews.a ... HomeMobile

[burridge01]

Cheers Steve,providing I can get back in the saddle I'll take that cover out

[Glenn]

Have a look at https://www.startrescue.co.uk/breakdown ... uick-quote I have them for my car and found them quick to respond when I had a blowout, then the locking wheel nut failed while trying change the wheel. My bike is still covered by BMW warranty.

[burridge01]

Cheers Glen, but I'll go with what Steve posted as I already have full UK & European RAC cover,so this will be about garage cost more than anything else

[Stu]

Start your own bloody thread

Anyway back on topic!

I have seen that you can get a grease needle for getting in to the UJ bearings to allow you to grease them up

When I next have my shaft out which is overdue by my standards! I will see if you could get in the grease them.

That combined with lubed splines and sealed boots should be surely enough to help prevent failures

[Panman40]

Start your own bloody thread

Anyway back on topic!

I have seen that you can get a grease needle for getting in to the UJ bearings to allow you to grease them up

When I next have my shaft out which is overdue by my standards! I will see if you could get in the grease them.

That combined with lubed splines and sealed boots should be surely enough to help prevent failures

It’s very rare I get my shaft out and lube it’s splines these days