hi Folks, I've started developing a tools list for my recently aquired camhead R1200RT (i.e. MY2012). I do this with each of my bikes so I can prepare for services. This is what I've got so far:-
Drain bung size = 8 mm allen key.
Clutch reservoir cap = T20 torx
Rear wheel = T50
Valve cover = T40
Muffler connection to frame = T45
Front = 22mm female hex.
Lower side fairings = T25
Has anybody got additions to this that they would like to share?
Tools Lists
- Doctor T
- Posts: 1985
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1133 times
- Been liked: 304 times
Re: Tools Lists
Oil filter removal socket. 76mm internal diameter with 12 Flutes.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx
- Steve398
- Subscriber
- Posts: 922
- Joined: Thu Jul 11, 2019 8:41 pm
- Location: West Sussex, UK
- Bike Model and Year: R1200RTLC, 2018
- Has liked: 417 times
- Been liked: 343 times
Re: Tools Lists
I’d hope that’s his garage list, not his on-bike one, otherwise he’d need a good sized trailer for that lot!
Cum Dubito Desisto
- Doctor T
- Posts: 1985
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1133 times
- Been liked: 304 times
Re: Tools Lists
Feelers
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx