BMW driveshaft recall/problems & preventative maintenance

General discussion of the BMW R1200RT/R1250RT
Casbar
Posts: 2670
Joined: Wed Jan 27, 2016 6:25 am
Been liked: 45 times
Great Britain

Re: BMW driveshaft recall/problems & preventative maintenance

Post by Casbar »

So why are RTps and our fleet civilian RTs included :lol:
User avatar
Doctor T
Posts: 1998
Joined: Tue Dec 21, 2021 10:21 pm
Location: west sussex
Bike Model and Year: 2007 R1200RT SE
Has liked: 1152 times
Been liked: 306 times
Great Britain

Re: BMW driveshaft recall/problems & preventative maintenance

Post by Doctor T »

When i greased my UJs and on refitting, i noticed a molded hole on the underside of the rubber boot. I took the boot off to check and indeed you could see it was in the mold. It was filled with grease so i just cleaned the hole out. The Cardan unit was replaced due to the UJ's braking. New rubber boots at each end two years ago by BMW north Oxford. Not sure if this was an upgrade fix or just as they are i don't know what the one was like before they changed it.
It is nice to have a fully documented service history. Must have been owned by an older chap as i have lists of when bulbs and MPG changed with dates and mileage.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
detroitboy
Posts: 2
Joined: Fri Apr 21, 2023 3:13 am
Bike Model and Year: 1200rt 2016
Been liked: 1 time
Ireland

Re: BMW driveshaft recall/problems & preventative maintenance

Post by detroitboy »

My 2016 1200RT had a shaft failure this past summer. A needle bearing in the u joint failed at speed on the interstate. 51000 miles. Complete shaft assembly replaced by my dealer, and reimbursed by bmw n America. The dealer backed me up as I am original owner and all maintenance was documented.
Post Reply