R1250RT - check your screens

Having Problems with your BMW R1200RT/R1250RT? or have some Maintenance and Service questions?
Post Reply
beemerboy9
Posts: 603
Joined: Sun Jan 31, 2016 9:44 am
Location: North London
Bike Model and Year: 1250RT 2019
Been liked: 21 times
Great Britain

R1250RT - check your screens

Post by beemerboy9 »

I was bemoaning my fate to a fellow owner of a '20 RT today and he has had the same problem.

I removed the screen for a belated clean and then removed the cover beneath, to reveal that one of the lower hinge pins and its circlip had gone walkabout and the other had lost its retaining circlip was was half-way out. If both let go, then the screen can tip back and hit the rider in the face.

BMW sell the pins and circlips separately (at great expense, naturally), but you definitely don't want the full force of the wind to be supported by only one arm.

Anyone else come across this already.?
Attachments
DSCN1089.JPG
DSCN1089.JPG (299 KiB) Viewed 1428 times
John Bentall
Casbar
Posts: 2670
Joined: Wed Jan 27, 2016 6:25 am
Been liked: 45 times
Great Britain

Re: R1250RT - check your screens

Post by Casbar »

Thanks, never seen this before, but I am off out to have a look at the two bikes I have in my garage at the moment to check
Casbar
Posts: 2670
Joined: Wed Jan 27, 2016 6:25 am
Been liked: 45 times
Great Britain

Re: R1250RT - check your screens

Post by Casbar »

Just checked a 2020 and 2019 RT, all fixings ok, and the pins and circles all have the blue sealing paint on them.
Mac001
Posts: 41
Joined: Tue May 16, 2023 2:25 pm
Location: Wiltshire
Bike Model and Year: R1250 RT LE 2019
Has liked: 15 times
Been liked: 14 times
Great Britain

Re: R1250RT - check your screens

Post by Mac001 »

Just checked mine, it is the same. One pin missing and the other has the clip missing. On the phone tomorrow I guess. Meanwhile will have to find a couple of bolts to hold it temporarily. Thanks for the heads up. Did they have these in stock and just in case do you have the part numbers?
User avatar
Old Foxy
Subscriber
Posts: 58
Joined: Tue Mar 03, 2020 12:19 pm
Has liked: 10 times
Been liked: 22 times
Great Britain

Re: R1250RT - check your screens

Post by Old Foxy »

Looked at mine today,. whilst the screen was off for a "de-bug". All good, I'm pleased to say. The pins look to be simple enough to fabricate on my old lathe, so if either does go missing, I will just make a few in shiny stainless steel, as replacements. I'm not paying BMW prices!

Old Foxy
Toaster
Posts: 42
Joined: Tue Dec 13, 2016 7:56 pm
Location: West Sussex, UK
Bike Model and Year: 2019 BMW R1250RT
Has liked: 1 time
Been liked: 1 time
Great Britain

Re: R1250RT - check your screens

Post by Toaster »

Checked mine....one circlip missing and the associated pin was partially out.
User avatar
Stu
Administrator
Posts: 1598
Joined: Wed Jun 02, 2021 9:13 pm
Location: Hull, UK
Bike Model and Year: 2016 R1200RT
Has liked: 559 times
Been liked: 519 times
Great Britain

Re: R1250RT - check your screens

Post by Stu »

I also checked mine and still all good!

I ordered t
Some new pins but with split pins in them instead! I am going to see how these fit when I get chance
Post Reply