12,000 mile service due

Post by **Gavj** » Mon Jul 17, 2023 7:06 pm

So, dealer wants £515 for this service, bikes just turned 3yr old and has done 11,500 miles so warranty is over.

Oil change - no problem
Air filter - No problem
Valve clearances.... - probably but never done a shift cam
Spark Plugs - no problem
Re set service light?.... I assume I need a scan tool / OSBDII thingy..... used a PC and cable to do my Triumphs anyone done theirs?

Post by **Stu** » Mon Jul 17, 2023 7:11 pm

If you are planning on doing your own servicing then I would invest that money in to the tools to do it correctly

I would be buying all the cam alignment tools and the timing jig too providing you can buy them again as they was out of stock everywhere!

I would think about investing in a GS-911 or the motoscan app too for the service light and any other issues you may face in the future

Post by **Gavj** » Mon Jul 17, 2023 8:17 pm

Been searching about and found this

: gs 911.JPG (55.29 KiB) Viewed 1796 times

Im assuming the 1250 is OBD and not the 10 pin.....

Post by **Panman40** » Mon Jul 17, 2023 8:28 pm

Gavj wrote: ↑Mon Jul 17, 2023 8:17 pm Been searching about and found this

gs 911.JPG

Im assuming the 1250 is OBD and not the 10 pin.....

Yes the 1250 is the obd, it’s a useful bit of kit.

Post by **Panman40** » Mon Jul 17, 2023 8:32 pm

I’ve had the cam alignment jig, cam chain tensioner tool and the tdc tool on order since December last year, the tdc tool arrived a few weeks ago but no sign of the rest as yet.

Post by **Stu** » Mon Jul 17, 2023 9:29 pm

Panman40 wrote: ↑Mon Jul 17, 2023 8:32 pm I’ve had the cam alignment jig, cam chain tensioner tool and the tdc tool on order since December last year, the tdc tool arrived a few weeks ago but no sign of the rest as yet.

Jesus!! I can't belive you are still waiting for them

Post by **Panman40** » Tue Jul 18, 2023 9:25 am

sakm wrote: ↑Mon Jul 17, 2023 9:29 pm Jesus!! I can't belive you are still waiting for them

I know!. If any of these tools get broken at a dealer how are they going to perform the tasks. I was going to check my shims but do t want to go back in to check the cam timing if they arrive soon. Urgh!

Post by **BoB21** » Tue Jul 18, 2023 10:11 am

£515 is a lot more than I would expect to pay for 12,000 mile service even if brake fluid change due. My last main service 60,000 only came to just over £300. Are they quoting for any other work?

Post by **Glenn** » Tue Jul 18, 2023 10:23 am

I was quoted £499 for a 12000 service in Shrewsbury last month

Post by **Gavj** » Tue Jul 18, 2023 7:45 pm

BoB21 wrote: ↑Tue Jul 18, 2023 10:11 am £515 is a lot more than I would expect to pay for 12,000 mile service even if brake fluid change due. My last main service 60,000 only came to just over £300. Are they quoting for any other work?

No Additional work, just had another quote from a different dealer, £400 or £350 without brake fluid….

Post by **Gavj** » Sun Jul 23, 2023 9:23 am

Still weighing up options, erring towards doing the service myself.. seen this scan tool, anyone used it?

: unicarscan.JPG (107.54 KiB) Viewed 1669 times

Im not finding a lot on youtube re checking vaves etc....

Post by **Boxflyer** » Sun Jul 23, 2023 10:30 am

Gavj wrote: ↑Sun Jul 23, 2023 9:23 am Im not finding a lot on youtube re checking vaves etc....

Here's some info on checking VALVES.
https://youtu.be/PQeNcD0gGOw

BMW R1200RT/R1250RT Forum

12,000 mile service due

12,000 mile service due

Re: 12,000 mile service due

Re: 12,000 mile service due

Re: 12,000 mile service due

Re: 12,000 mile service due

Re: 12,000 mile service due

Re: 12,000 mile service due

Re: 12,000 mile service due

Re: 12,000 mile service due

Re: 12,000 mile service due

Re: 12,000 mile service due

Re: 12,000 mile service due