My 2007 has twin horns. One is the old standard metal type and the other is a Denali sound bomb type(BMW stamped).
My question is can i get rid of the metal one and fit another sound bomb type using the standard wiring? Ive read many GS owners fit twins(hi &low) from E39 Bmw series 5 cars without extra wiring. The posts ive read say that it does not trip the Cambus.
On the horn
- Doctor T
- Posts: 1998
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1152 times
- Been liked: 306 times
On the horn
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx
-
- Posts: 23
- Joined: Fri Jun 09, 2023 6:31 pm
- Bike Model and Year: R1200RT 2012
- Been liked: 6 times
Re: On the horn
I have twin horns similar to these https://www.amazon.co.uk/110db-Loud-Sna ... 6369&psc=1 on my 2012 twincam. Couldn't tell you if they were standard (I suspect not) but they work just fine with no extra relay - CANBUS doesn't seem to mind.
-
- Posts: 46
- Joined: Thu Dec 08, 2022 10:20 pm
- Location: Mansfield East Midlands
- Bike Model and Year: 2015 R1200rt
- Been liked: 14 times
Re: On the horn
My 2015 rt had the crap standard horn which I swapped for the higher tone from a k100 .
This is louder , but I could not manage to fit both horns from the k100 which sounded like a fog horn.
How does the later models fit twin horns?
Bob
This is louder , but I could not manage to fit both horns from the k100 which sounded like a fog horn.
How does the later models fit twin horns?
Bob
- Doctor T
- Posts: 1998
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1152 times
- Been liked: 306 times
Re: On the horn
I have enough room and can use the metal buzzer horn bracket. With research, ive found out the fiamm snail type horn draws no more than 6A. Does anyone know how many amps the standard metal horn draws?
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx
-
- Posts: 806
- Joined: Tue Jul 02, 2019 11:25 am
- Location: Basildon, Essex
- Bike Model and Year: NUFFINK
- Been liked: 327 times
-
- Posts: 46
- Joined: Thu Dec 08, 2022 10:20 pm
- Location: Mansfield East Midlands
- Bike Model and Year: 2015 R1200rt
- Been liked: 14 times
Re: On the horn
There was not enough room to fit a second k100 horn, so a Denali bomb will eventually be an addition at some point, obviously the Bmw bean
counters have either never ridden a bike, or they found a job lot inside some Christmas crackers.
We pay enough for the bikes these days..
counters have either never ridden a bike, or they found a job lot inside some Christmas crackers.
We pay enough for the bikes these days..
- Doctor T
- Posts: 1998
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1152 times
- Been liked: 306 times
Re: On the horn
Tested my horns today. Denali type drew 5A and the metal horn drew 2.3A=7.3A. Will the extra 2.7A trip the canbus? At the moment i have no way to test it and don't fancy buying another horn that may just sit in a box for years.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx