Has anyone else found the pins that hold the rear pegs seized inside the foot peg.
I had to remove both rear hangers, tape up the rubber part of the rest.
I then had to use heat and oil and a punch to free them and take them out.
I've never had this on any bike before, even my 25 year old Hayabusa.
My RT is just over 4 years old with less than 16k on it.
Also i think the BMW dealer lied about the recall work for the rear clips being done.
Rear Foot Rests
-
exportman
- Posts: 307
- Joined: Tue Sep 27, 2016 7:57 pm
- Bike Model and Year: R1250RT 2023
- Has liked: 9 times
- Been liked: 45 times
Re: Rear Foot Rests
Hi
Yes on my 2016 The near side was OK but the offside had seize solid found out when I needed to take a pillion tool considerable effort to move it. The like you had to remove the hanger to get it free and working as it should. New Bike I make sure I move the pegs every time I clean it
Yes on my 2016 The near side was OK but the offside had seize solid found out when I needed to take a pillion tool considerable effort to move it. The like you had to remove the hanger to get it free and working as it should. New Bike I make sure I move the pegs every time I clean it
-
Dave Pitkethly
- Posts: 6
- Joined: Wed Jan 25, 2023 12:48 pm
- Location: Newcastle upon Tyne
- Bike Model and Year: R1250RT LE 2023
- Has liked: 1 time
Re: Rear Foot Rests
My RT is March 2023 and have recently received a Recall letter from BMW - Replacing Securing Clips for Footrests, due to corrosion. Will get mine done on its next service.