Also has anyone changed the brake fluid and purged the abs pump with no issues using the GS911 ?.
Clutch and brake fluid change ?
-
Panman40
- Subscriber
- Posts: 466
- Joined: Tue Mar 22, 2022 8:46 pm
- Has liked: 422 times
- Been liked: 56 times
Clutch and brake fluid change ?
Apologies if I’ve asked this before but… does the clutch fluid on a 1250rt need to be changed as I don’t see it in the maintenance schedule ?.
Also has anyone changed the brake fluid and purged the abs pump with no issues using the GS911 ?.
Also has anyone changed the brake fluid and purged the abs pump with no issues using the GS911 ?.
-
simbo
- Subscriber
- Posts: 1453
- Joined: Fri Sep 16, 2016 10:33 pm
- Location: Greater Manchester
- Bike Model and Year: RT 2011
- Has liked: 80 times
- Been liked: 135 times
Re: Clutch and brake fluid change ?
I thought they used mineral oil in the clutch like on the older versions? If so? That lasts the life of the bike. Does it not say on the reservoir lid?.
The GS 'is' the better bike :-)
-
Doctor T
- Posts: 1918
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1075 times
- Been liked: 281 times
Re: Clutch and brake fluid change ?
Looking over my service history. There is nothing regarding that BMW had changed the clutch fluid.If you wish to change it only use mineral oil. Any make will do
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
-
Stu
- Administrator
- Posts: 1535
- Joined: Wed Jun 02, 2021 9:13 pm
- Location: Hull, UK
- Bike Model and Year: 2016 R1200RT
- Has liked: 540 times
- Been liked: 487 times
Re: Clutch and brake fluid change ?
It will have mineral oil in it and its supposed to last the lifetime of the bike
I'm not a fan of this and replaced mine and it was a pig of a job
I'm not a fan of this and replaced mine and it was a pig of a job
. I was just about to say I’ll get some mineral oil and change it but after reading Sakm*s post I think I’ve changed my mind!.-
Our Gee
- Posts: 787
- Joined: Sun Nov 08, 2015 7:43 am
- Location: North Yorkshire UK
- Bike Model and Year: R1200RT 2011
- Been liked: 29 times
Re: Clutch and brake fluid change ?
It's just as easy to use the correct "mineral" oil which is Hyspin V10. The BMW Part Number being 21 52 2 455 540. I changed mine a couple of years ago and as SAKM says it can be a bit tricky and requires "back filling" from the Slave Cylinder using a suitable syringe and tubing. At the same time I changed the seals in the Master Cylinder.
-
David.
- Subscriber
- Posts: 8261
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 379 times
Re: Clutch and brake fluid change ?
09' R1200RT Clutch bleeding DIY, viewtopic.php?p=65595&hilit=v10#p65595