Dented rims

General discussion of the BMW R1200RT/R1250RT
Post Reply
User avatar
Steve398
Subscriber
Posts: 891
Joined: Thu Jul 11, 2019 8:41 pm
Location: West Sussex, UK
Bike Model and Year: R1200RTLC, 2018
Has liked: 387 times
Been liked: 315 times
Isle of Wight

Dented rims

Post by Steve398 »

I’ve read that the wheels are pretty easy to dent, so it came as no surprise that an MOT test today came with an advisory that my front wheel is dented.

So where do I go from here? I’m certainly not courageous or talented enough to start swinging a hammer around to resolve the issue for myself, and several calls prompted by Google searches have all been met with the same “We don’t do bikes” response.

The one positive answer came from Maidstone Motoliner in Aylesford, Kent, who appear to be alone in repairing cast bike wheels with a quoted 4 day turn-around, they can also arrange a while-you-wait service with notice. So I’ll drop the wheel off with them in January, it has to be cheaper than a new one!

https://www.motoliner.com/
User avatar
David.
Subscriber
Posts: 8261
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 379 times
Great Britain

Re: Dented rims

Post by David. »

I've dented rims on all three of my RT's,. the wheels are like toffee.

Fortunately, in the NE, there is Roy Thursby at Stockton-on-Tees who is only a couple of miles away from me to sort them out. The most recent one was earlier this year. I had to get the tyre removed and refitted/balanced (15 GBP) after Roy had repaired it in his custom made wheel jig (80 GBP).

A new wheel could be around 700 GBP.
User avatar
Steve398
Subscriber
Posts: 891
Joined: Thu Jul 11, 2019 8:41 pm
Location: West Sussex, UK
Bike Model and Year: R1200RTLC, 2018
Has liked: 387 times
Been liked: 315 times
Isle of Wight

Re: Dented rims

Post by Steve398 »

David. wrote: Thu Nov 10, 2022 8:27 pm I've dented rims on all three of my RT's,. the wheels are like toffee.

Fortunately, in the NE, there is Roy Thursby at Stockton-on-Tees who is only a couple of miles away from me to sort them out. The most recent one was earlier this year. I had to get the tyre removed and refitted/balanced (15 GBP) after Roy had repaired it in his custom made wheel jig (80 GBP).

A new wheel could be around 700 GBP.
When I lived in Lincolnshire many years ago I had the misfortune to run over a lorry spring hanger bolt which buckled and punched a hole through the front wheel on my ZX10. I found Thursby’s advert in MCN and travelled across to his workshop and waited as he welded the hole, and then straightened the rim with a big hammer on his home made jig. It was horrifying to watch but the wheel ran straight and true afterwards and didn’t leak either. I was astonished but very happy. Top man!
Panman40
Subscriber
Posts: 466
Joined: Tue Mar 22, 2022 8:46 pm
Has liked: 422 times
Been liked: 56 times
Great Britain

Re: Dented rims

Post by Panman40 »

Was out yesterday and did about 170mls, Exmoor and Dartmoor, I’m astounded how bad the roads are now with uneven surfaces and potholes… you have to concentrate so hard to avoid holes and also those seep ravines which are often in the centre of the road around towns, crossing the white lines and getting in one of these will have you off easily.
It was very sunny and at one point we were in a very shady spot going uphill on a bend in amongst traffic and then suddenly there’s no way to avoid this 4” deep bloody great hole 🤬, I now have a dented front rim 🤦, apart from ass ache, cramp, sore right elbow and neck pain we were having a really nice ride around beautiful countryside 🙄
User avatar
Steve398
Subscriber
Posts: 891
Joined: Thu Jul 11, 2019 8:41 pm
Location: West Sussex, UK
Bike Model and Year: R1200RTLC, 2018
Has liked: 387 times
Been liked: 315 times
Isle of Wight

Re: Dented rims

Post by Steve398 »

Time to buy a Gold Wing Martin :lol:

As a footnote to my first post - Motoloner did an excellent ‘while you wait’ job on a loose wheel for £110, while I spent a couple of hours in a nearby supermarket cafe. :thumb:
Panman40
Subscriber
Posts: 466
Joined: Tue Mar 22, 2022 8:46 pm
Has liked: 422 times
Been liked: 56 times
Great Britain

Re: Dented rims

Post by Panman40 »

I would Steve but I don’t have your funds :lol: , Kent’s about a 4 hr trip so I’ve messaged motoliner about couriers etc and maybe wait until winter , I’m guessing with the state of the roads they will be very busy at the mo!.
User avatar
Stu
Administrator
Posts: 1535
Joined: Wed Jun 02, 2021 9:13 pm
Location: Hull, UK
Bike Model and Year: 2016 R1200RT
Has liked: 540 times
Been liked: 487 times
Great Britain

Re: Dented rims

Post by Stu »

I have also bent my front very slightly today :mad:
Panman40
Subscriber
Posts: 466
Joined: Tue Mar 22, 2022 8:46 pm
Has liked: 422 times
Been liked: 56 times
Great Britain

Re: Dented rims

Post by Panman40 »

sakm wrote: Sat Jul 20, 2024 8:17 pm I have also bent my front very slightly today :mad:
It’s ridiculous the state of the roads now, I’m almost at the point I’m not really enjoying the ride just looking to avoid potholes now :(
User avatar
David.
Subscriber
Posts: 8261
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 379 times
Great Britain

Re: Dented rims

Post by David. »

If you can identify the offending pothole which caused the damage to the wheel and take a photograph, I believe you may be able to claim against the local council responsible for maintaining the road.

https://www.moneysupermarket.com/car-in ... 0authority.
User avatar
Steve398
Subscriber
Posts: 891
Joined: Thu Jul 11, 2019 8:41 pm
Location: West Sussex, UK
Bike Model and Year: R1200RTLC, 2018
Has liked: 387 times
Been liked: 315 times
Isle of Wight

Re: Dented rims

Post by Steve398 »

David. wrote: Sun Jul 21, 2024 8:23 am If you can identify the offending pothole which caused the damage to the wheel and take a photograph, I believe you may be able to claim against the local council responsible for maintaining the road.

https://www.moneysupermarket.com/car-in ... 0authority.
Best of luck with that Martin! In our area they will not pay if it is less than 6” deep, has been reported to them, has a white marker line around it, etc., etc., etc. When I read through their list it appears there is very little chance of making a successful claim.
burridge01
Posts: 752
Joined: Tue Jul 02, 2019 11:25 am
Location: Basildon, Essex
Bike Model and Year: Modified "16" R1200RT
Been liked: 284 times
Great Britain

Re: Dented rims

Post by burridge01 »

Steve398 wrote: Sun Jul 21, 2024 9:37 am Best of luck with that Martin! In our area they will not pay if it is less than 6” deep, has been reported to them, has a white marker line around it, etc., etc., etc. When I read through their list it appears there is very little chance of making a successful claim.
John,why are we calling each other different names.Everything was in order till Trevor asked about people's monickers,getting all a bit confusing on here nowadays :shock:
User avatar
Doctor T
Posts: 1918
Joined: Tue Dec 21, 2021 10:21 pm
Location: west sussex
Bike Model and Year: 2007 R1200RT SE
Has liked: 1075 times
Been liked: 281 times
Great Britain

Re: Dented rims

Post by Doctor T »

Steve398 wrote: Sun Jul 21, 2024 9:37 am Best of luck with that Martin! In our area they will not pay if it is less than 6” deep, has been reported to them, has a white marker line around it, etc., etc., etc. When I read through their list it appears there is very little chance of making a successful claim.
I snapped a car wheel. I sent tonnes of pictures with measurements. The Council kept rejected my claim. The problem was the alloy wheels were not made any more. I contacted my insurance company and they would not allow copies of the wheels, saying they had to be like for like. They took the highways dept of West Sussex council to court 4 times. In the end the council buckled(sorry about the pun) under and paid for a set of wheels and paid my lnsurance costs. Took over a year of going back and forth whilst I was driving around on the thin temp wheel. The insurance company ended up finding a new set from Italy(new old stock. Along with 5 new tyres. Seeing there were less than 150 made of the Rare Mondeo ST220 limited editions made, it would have taken me a lifetime to find the wheels.

Back to MC wheels my Tiger front wheel had a slight buckle on one side of the rim. After watching hours of videos on YT. I heated the rim on the inside with a blow torch and hitting it with a leather mallet and a piece of 4x2 wood. Two hours later I had a straight rim. Surprisingly the paint was still in good condition.
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
Panman40
Subscriber
Posts: 466
Joined: Tue Mar 22, 2022 8:46 pm
Has liked: 422 times
Been liked: 56 times
Great Britain

Re: Dented rims

Post by Panman40 »

David. wrote: Sun Jul 21, 2024 8:23 am If you can identify the offending pothole which caused the damage to the wheel and take a photograph, I believe you may be able to claim against the local council responsible for maintaining the road.

https://www.moneysupermarket.com/car-in ... 0authority.
I did say to my wife shall we stop and go back to photograph it but the road was very busy, but like Steve was saying the councils have a myriad of criteria for a claim.
User avatar
Stu
Administrator
Posts: 1535
Joined: Wed Jun 02, 2021 9:13 pm
Location: Hull, UK
Bike Model and Year: 2016 R1200RT
Has liked: 540 times
Been liked: 487 times
Great Britain

Re: Dented rims

Post by Stu »

Don't think I would be able to put a claim in for those on this road :lol:

Anyway checked with rim and its less than 1mm out so I'm not worried about it
Attachments
Screenshot 2024-07-21 181210.png
Screenshot 2024-07-21 181210.png (861.26 KiB) Viewed 2107 times
Panman40
Subscriber
Posts: 466
Joined: Tue Mar 22, 2022 8:46 pm
Has liked: 422 times
Been liked: 56 times
Great Britain

Re: Dented rims

Post by Panman40 »

That’s us off to Maidstone in Kent on Sunday and taking the wheel with me to drop off at Motoliner on the Monday.
Post Reply