Ok I’m thinking of an Innov K6 front/rear camera, I want it simple as as I don’t intend fittin anything else to the RT is there an easy way to connect it up on a switched live basis or do I have to spend out on a Fuzebox or ezcan etc ?
Thanks.
Innov K6 install ?
- EasyRider
- Subscriber
- Posts: 938
- Joined: Tue Nov 21, 2023 7:27 am
- Location: Wales
- Bike Model and Year: 2019 R1250RT LE
- Has liked: 121 times
- Been liked: 305 times
Re: Innov K6 install ?
As you know i have just bought the K7, and after sorting some problems out i am happy with it.
Just set it up on a switch live and the battery.
The switch live is under the seat by the tuel tank. its the white/red wire.
And if you want all the wiring out of the way, fit the main unit behind one of the speaker covers.
Just set it up on a switch live and the battery.
The switch live is under the seat by the tuel tank. its the white/red wire.
And if you want all the wiring out of the way, fit the main unit behind one of the speaker covers.
Dont Ride Faster, Than Your Angel Can Fly.
-
- Subscriber
- Posts: 488
- Joined: Tue Mar 22, 2022 8:46 pm
- Has liked: 474 times
- Been liked: 76 times
Re: Innov K6 install ?
That sounds easy enough, so earth to the battery terminal ?.EasyRider wrote: ↑Tue Aug 06, 2024 8:34 am As you know i have just bought the K7, and after sorting some problems out i am happy with it.
Just set it up on a switch live and the battery.
The switch live is under the seat by the tuel tank. its the white/red wire.
And if you want all the wiring out of the way, fit the main unit behind one of the speaker covers.
Having another look and I’m surprised how physically large the cameras are, do you have any suggestions or pictures on where the best place is to fit them ?.
- Glenn
- Subscriber
- Posts: 384
- Joined: Sat Jan 15, 2022 7:49 pm
- Location: Shropshire
- Bike Model and Year: R1250RT LE 2019
- Has liked: 43 times
- Been liked: 144 times
Re: Innov K6 install ?
I use one of these with my K3 https://www.aliexpress.com/item/4001166 ... 1802pVZlxd
-
- Posts: 2
- Joined: Tue Aug 08, 2023 1:57 am
- Location: San Francisco
- Bike Model and Year: 2021 R1250RT
Re: Innov K6 install ?
I looked into that bracket and apparently, it's for the RT prior to 2021. Is there something like that that will fit my 2021 RT?Glenn wrote: ↑Tue Aug 06, 2024 6:28 pm I use one of these with my K3 https://www.aliexpress.com/item/4001166 ... 1802pVZlxd
Thanks.