Fork Seals

Having Problems with your BMW R1200RT/R1250RT? or have some Maintenance and Service questions?
Post Reply
rickmeister
Posts: 17
Joined: Mon Aug 22, 2016 8:22 am
Location: Maitland, Australia
Bike Model and Year: R1200RT, 2015
Australia

Fork Seals

Post by rickmeister »

2015 R1200RT. Just had y fork seals replaced. They were both weeping, and my mechanic suggested I should get them replaced. So, after they were replaced, I found that sitting on the bike, engine off, ignition off, front brake applied, trying to "rock" the bike fore and aft. and found that the front end was like a rock! Didn't move one iota. Started the bike and sure enough, the front suspension was "enabled". Went for a 60Km ride and found all seemed OK. My questions are...is this normal? Is the front suspension also controlled by the electronic wizardry suspension adjustment (Hard, Normal and Soft)?
User avatar
David.
Subscriber
Posts: 8261
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 379 times
Great Britain

Re: Fork Seals

Post by David. »

rickmeister wrote: Thu Aug 29, 2024 4:04 amIs the front suspension also controlled by the electronic wizardry suspension adjustment (Hard, Normal and Soft).
AFAIK, if the motorcycle is fitted with ESA, the front suspension/shock absorber damping can be adjusted to Hard, Normal & Soft.

ESA.JPG
ESA.JPG (14.94 KiB) Viewed 672 times
BoB21
Posts: 833
Joined: Fri Apr 21, 2017 11:38 am
Bike Model and Year: 2017
Has liked: 115 times
Been liked: 67 times
Great Britain

Re: Fork Seals

Post by BoB21 »

normal, suspension needs electronics on to function.
rickmeister
Posts: 17
Joined: Mon Aug 22, 2016 8:22 am
Location: Maitland, Australia
Bike Model and Year: R1200RT, 2015
Australia

Re: Fork Seals

Post by rickmeister »

Great, Thanks Lads! Bit of a load off the mind!
Post Reply