Fork Seals
-
- Posts: 20
- Joined: Mon Aug 22, 2016 8:22 am
- Location: Maitland, Australia
- Bike Model and Year: R1200RT, 2015
Fork Seals
2015 R1200RT. Just had y fork seals replaced. They were both weeping, and my mechanic suggested I should get them replaced. So, after they were replaced, I found that sitting on the bike, engine off, ignition off, front brake applied, trying to "rock" the bike fore and aft. and found that the front end was like a rock! Didn't move one iota. Started the bike and sure enough, the front suspension was "enabled". Went for a 60Km ride and found all seemed OK. My questions are...is this normal? Is the front suspension also controlled by the electronic wizardry suspension adjustment (Hard, Normal and Soft)?
- David.
- Subscriber
- Posts: 8342
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 395 times
Re: Fork Seals
AFAIK, if the motorcycle is fitted with ESA, the front suspension/shock absorber damping can be adjusted to Hard, Normal & Soft.rickmeister wrote: ↑Thu Aug 29, 2024 4:04 amIs the front suspension also controlled by the electronic wizardry suspension adjustment (Hard, Normal and Soft).
-
- Posts: 20
- Joined: Mon Aug 22, 2016 8:22 am
- Location: Maitland, Australia
- Bike Model and Year: R1200RT, 2015