Looking to install a 1 inch Ramm Ball onto BMW r1250 RT clutch or brake reservoir top plate using same screw thread as stock screws. Have searched hi and low and can't find this type of base mount.
I have found top mounting plates with slotted screw holes, but they require elevated mounting via shim washers. Don't want that it looks very tacky.
The pics I posted is the mount I am looking for.
Help!
Ninja
Where can I find this Ramm ball mount?
-
- Posts: 11
- Joined: Fri Oct 11, 2024 12:21 am
- Location: Daytona Beach, Fl
- Bike Model and Year: R1250 RT ,2020 BMW
- Been liked: 1 time
Where can I find this Ramm ball mount?
- Attachments
-
- Ball mount 1.jpg (267.01 KiB) Viewed 214 times
-
- thumbnail(3).jpg (31.81 KiB) Viewed 214 times
-
- mount 2.jpg (289.15 KiB) Viewed 214 times
"You cannot, not communicate."
-
- Posts: 41
- Joined: Sat Mar 16, 2024 8:21 pm
- Location: Ireland
- Bike Model and Year: BMW R1200RT 2015
- Has liked: 39 times
- Been liked: 6 times
Re: Where can I find this Ramm ball mount?
Do you mean this one?
https://www.normski-bmw.co.uk/product-p ... r-ram-bolt
I had it one day, but it was a bit too tight, my clutch lever was not returning fully on a sunny day and because of that the clutch switch didn't disengage and my quick-shifter wasn't working. I'll need to get it machined a bit. But it could be my specific issue, I am still planning on getting it on my bike.
https://www.normski-bmw.co.uk/product-p ... r-ram-bolt
I had it one day, but it was a bit too tight, my clutch lever was not returning fully on a sunny day and because of that the clutch switch didn't disengage and my quick-shifter wasn't working. I'll need to get it machined a bit. But it could be my specific issue, I am still planning on getting it on my bike.
I am here to learn.
-
- Posts: 11
- Joined: Fri Oct 11, 2024 12:21 am
- Location: Daytona Beach, Fl
- Bike Model and Year: R1250 RT ,2020 BMW
- Been liked: 1 time
Re: Where can I find this Ramm ball mount?
Arends,
Thanks for this website this is exactly what I was looking for already contacted the man who makes them in his home work shop and ordered both types of Ramm ball mount extension machined bolts.
Very well made out of Stainless steel about $28.00 from the UK, and I gave him an idea of a temporary extended clutch pivot bolt to allow you to place your helmet D ring over the bolt head for a temporary stop so it won't fall off the bike on windy days.
Ninja
Thanks for this website this is exactly what I was looking for already contacted the man who makes them in his home work shop and ordered both types of Ramm ball mount extension machined bolts.
Very well made out of Stainless steel about $28.00 from the UK, and I gave him an idea of a temporary extended clutch pivot bolt to allow you to place your helmet D ring over the bolt head for a temporary stop so it won't fall off the bike on windy days.
Ninja
"You cannot, not communicate."
- Doctor T
- Posts: 1988
- Joined: Tue Dec 21, 2021 10:21 pm
- Location: west sussex
- Bike Model and Year: 2007 R1200RT SE
- Has liked: 1136 times
- Been liked: 304 times
Re: Where can I find this Ramm ball mount?
He also has a good YT channel. Normski motorbike
Trust me I am a retired Doctor and lecturer at Oxford University of Structural and Mechanical/Electrical engineering.
"Blessed are the cracked, for they shall let in the light". Groucho Marx
"Blessed are the cracked, for they shall let in the light". Groucho Marx