Flashing red light on key fob

General discussion of the BMW R1200RT/R1250RT
Post Reply
DK1083
Posts: 8
Joined: Wed Jun 26, 2024 11:58 am
Bike Model and Year: RT 1200 2011
Has liked: 3 times
Been liked: 2 times
Great Britain

Flashing red light on key fob

Post by DK1083 »

Hi all;
I have a 2014 1200RT LC. I’ve not had the bike long and have noticed a red flashing light on the key fob. If I press the other switch on the fob it stops.
Can anyone tell me what the flashing light means?
User avatar
jesim1
Subscriber
Posts: 236
Joined: Wed Oct 05, 2022 8:47 pm
Location: Kilmaurs, Ayrshire
Bike Model and Year: R1250RTLE 2022
Has liked: 117 times
Been liked: 72 times
Great Britain

Re: Flashing red light on key fob

Post by jesim1 »

I don't know the legitimate answer, but it sounds like an emergency or panic button - if your near the bike does it activate the alarm or hazards? I'm sure an old manual from on line will be available if you try to track it down via Google :cheers:
DK1083
Posts: 8
Joined: Wed Jun 26, 2024 11:58 am
Bike Model and Year: RT 1200 2011
Has liked: 3 times
Been liked: 2 times
Great Britain

Re: Flashing red light on key fob

Post by DK1083 »

I’ve read the manual but it seems to refer to being able to set/unset the central locking system, but it doesn’t seem to do anything.
User avatar
David.
Subscriber
Posts: 8301
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 388 times
Great Britain

Re: Flashing red light on key fob

Post by David. »

"If the central locking system stops responding to the signals from a remote control, the unit in question has to be synchronised."

The procedure for synchronising the remote controls is as follows:

Switch on the ignition.
Press and hold down buttons 1 and 2 until LED stops flashing.
LED flashes for about ten seconds.
Release buttons 1 and 2.
LED lights up.
Press button 1 or button 2.
LED goes out.
BoB21
Posts: 841
Joined: Fri Apr 21, 2017 11:38 am
Bike Model and Year: 2017
Has liked: 123 times
Been liked: 68 times
Great Britain

Re: Flashing red light on key fob

Post by BoB21 »

David. wrote: Wed Nov 06, 2024 8:57 am "If the central locking system stops responding to the signals from a remote control, the unit in question has to be synchronised."

The procedure for synchronising the remote controls is as follows:

Switch on the ignition.
Press and hold down buttons 1 and 2 until LED stops flashing.
LED flashes for about ten seconds.
Release buttons 1 and 2.
LED lights up.
Press button 1 or button 2.
LED goes out.
That is procedure to sync a keyed bike not sure if same for keyless as diffrent fob.
User avatar
David.
Subscriber
Posts: 8301
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 388 times
Great Britain

Re: Flashing red light on key fob

Post by David. »

In 2014, was the ignition switched by a key and the optional central locking operated by a fob.

When was keyless introduced.
BoB21
Posts: 841
Joined: Fri Apr 21, 2017 11:38 am
Bike Model and Year: 2017
Has liked: 123 times
Been liked: 68 times
Great Britain

Re: Flashing red light on key fob

Post by BoB21 »

David. wrote: Wed Nov 06, 2024 5:44 pm In 2014, was the ignition switched by a key and the optional central locking operated by a fob.

When was keyless introduced.
Dont know,thats why I dont try to answer questions on models i dont know about! no info is more helpfull than wrong info. My 2017 is still keyed ignition but most were not by this stage. There was a choice between both for a number of years, other countries may well be diffrent. locking can be done via switch on handlebar or fob. Alarm by fob only on mine.
User avatar
Stu
Administrator
Posts: 1585
Joined: Wed Jun 02, 2021 9:13 pm
Location: Hull, UK
Bike Model and Year: 2016 R1200RT
Has liked: 555 times
Been liked: 512 times
Great Britain

Re: Flashing red light on key fob

Post by Stu »

I have keyless ignition and remote central locking

I can't say I have ever seen an LED on the fob at all

Doe the bike have central locking and keyless ignition?
BoB21
Posts: 841
Joined: Fri Apr 21, 2017 11:38 am
Bike Model and Year: 2017
Has liked: 123 times
Been liked: 68 times
Great Britain

Re: Flashing red light on key fob

Post by BoB21 »

From manual. not sure what your asking Stu. Mine is keyed ignition but can activate central locking from handle bar button or key fob. Activate alarm from key fob only as far as im aware. button 1 locks, push 1 again alarms, button 2 unlocks and unalarms one push. if remember correctly. if push buttons or hold to long fob unsyncs from bike so follow procedure to sync again.
Attachments
Screenshot_20241021_075640_Drive.jpg
Screenshot_20241021_075640_Drive.jpg (137.73 KiB) Viewed 234 times
User avatar
Stu
Administrator
Posts: 1585
Joined: Wed Jun 02, 2021 9:13 pm
Location: Hull, UK
Bike Model and Year: 2016 R1200RT
Has liked: 555 times
Been liked: 512 times
Great Britain

Re: Flashing red light on key fob

Post by Stu »

@BoB21 my questions was aimed at the author of the thread as there is two types of fob depending on if you have keyless ignition or not

If you have keyless ignition it's all built in to one fob
User avatar
David.
Subscriber
Posts: 8301
Joined: Fri Nov 07, 2014 7:29 pm
Location: North Yorkshire
Bike Model and Year: R1200RT (Camhead) 2012
Been liked: 388 times
Great Britain

Re: Flashing red light on key fob

Post by David. »

If the keyless fob doesn't have an LED, does this mean that the fob with an LED belongs to a motorcycle with keyed ignition and remote central locking.

Is this the keyless fob.
Image

Fob with LED.
Image
Post Reply