Page 6 of 6

Re: BMW R1200RT Cam alignment tools

Posted: Tue Mar 12, 2024 8:54 am
by EasyRider
Panman40 wrote: ↑Tue Mar 12, 2024 8:43 am So, well into March now and still no sign of the cam chain tensioner tool :roll:
Thats what i had delivered last week :lol:

Re: BMW R1200RT Cam alignment tools

Posted: Wed Mar 13, 2024 9:22 pm
by Panman40
From where ?

Re: BMW R1200RT Cam alignment tools

Posted: Thu Mar 21, 2024 6:15 am
by Panman40
EasyRider wrote: ↑Tue Mar 12, 2024 8:54 am Thats what i had delivered last week :lol:
Where did you get it from ?.

Re: BMW R1200RT Cam alignment tools

Posted: Thu Mar 21, 2024 6:20 am
by EasyRider
Panman40 wrote: ↑Thu Mar 21, 2024 6:15 am Where did you get it from ?.
Sorry it was a old type joke. meaning it was delivered to me and not you. Sorry for the misunderstanding sir.

Re: BMW R1200RT Cam alignment tools

Posted: Mon Mar 25, 2024 6:18 am
by Panman40
EasyRider wrote: ↑Thu Mar 21, 2024 6:20 am Sorry it was a old type joke. meaning it was delivered to me and not you. Sorry for the misunderstanding sir.
:lol: :lol: :lol:

Re: BMW R1200RT Cam alignment tools

Posted: Sat Mar 30, 2024 8:31 am
by Panman40
And...it's arrived at the dealers !!πŸ˜‚

Re: BMW R1200RT Cam alignment tools

Posted: Sat Mar 30, 2024 11:17 am
by Steve398
Patience is a virtue Martin 🀣

Re: BMW R1200RT Cam alignment tools

Posted: Sat Mar 30, 2024 2:47 pm
by Panman40
Steve398 wrote: ↑Sat Mar 30, 2024 11:17 am Patience is a virtue Martin 🀣
Paid off in the end Steve, can you remind me what it's actually for as I've forgotten πŸ˜‚.

Re: BMW R1200RT Cam alignment tools

Posted: Wed Apr 10, 2024 7:31 am
by Panman40
I was just going to refresh my memory on using the cam chain tensioner tool but can’t seem to find the correct video which uses the oe bmw tool ?.
From memory I think you slide on the sleeve, screw the tensioner in all the way until seated then insert the pinned knurled part and turn clockwise until it clicks 3 times ?.
Thanks 8-)

Re: BMW R1200RT Cam alignment tools

Posted: Wed Apr 24, 2024 4:06 pm
by Roderikk
Panman40 wrote: ↑Wed Apr 10, 2024 7:31 am I was just going to refresh my memory on using the cam chain tensioner tool but can’t seem to find the correct video which uses the oe bmw tool ?.
From memory I think you slide on the sleeve, screw the tensioner in all the way until seated then insert the pinned knurled part and turn clockwise until it clicks 3 times ?.
Thanks 8-)
Where do you find the chan tensioner? I cant find it anywhere :cry:

Re: BMW R1200RT Cam alignment tools

Posted: Fri Apr 26, 2024 4:26 pm
by Panman40
Roderikk wrote: ↑Wed Apr 24, 2024 4:06 pm Where do you find the chan tensioner? I cant find it anywhere :cry:
A bmw dealer here in the uk, took over a year to get it. :o

Re: BMW R1200RT Cam alignment tools

Posted: Tue May 14, 2024 8:52 pm
by Panman40
So, ….. after a very very looooong time waiting for the BMW cam timing tools I decided to get the job done.
Both left / right side inlet and exhaust cam alignment was off, I’ve yet to ride and test after adjusting as the heavens opened πŸ™„. I’m not looking for any improvement in performance/ride ability but at least I know things are set up correctly now. 🀣