BMW R1200RT/R1250RT Forum

Posted: **Wed Jul 01, 2015 2:56 pm**

Was previous happy with a Sargent Seat on 2004 K1200RS post 1,000 mile ride and decided to update seat on 2015 R1200RT.  Just received this seat and took some pix to share.  Hope to get some riding today.

Front Seat Top

Sargent Seat - R1200RT LC

Front Seat Bottom

Sargent Seat - R1200RT LC

Rear Seat Top

Sargent Seat - R1200RT LC

Rear Seat Bottom

Sargent Seat - R1200RT LC

Front Seat Storage Pod

Sargent Seat - R1200RT LC

Front Seat Fit

Sargent Seat - R1200RT LC

Installed

Sargent Seat - R1200RT LC

Posted: **Wed Jul 01, 2015 4:28 pm**

Looks pretty nice! let us know how it rides and what it cost you. Great pictures.

Posted: **Tue Jul 07, 2015 3:54 pm**

I have ordered the heated front seat and standard rear and it has cost me £606.00! Hope there worth it.

Sent from my iPhone using Tapatalk

Posted: **Wed Jul 08, 2015 1:28 pm**

bunny2585 wrote: I have ordered the heated front seat and standard rear and it has cost me £606.00! Hope there worth it.

I think believe the Sargent seats offer a good value option relative to other custom seats (e.g., Corbin, Russell).  Seats experience can get be so subjective though.  I sincerely hope it works for you.

Posted: **Tue Jul 14, 2015 8:00 pm**

Any experience to report yet?

Sent from my iPad using Tapatalk HD

Posted: **Wed Jul 15, 2015 9:10 pm**

fmantek wrote: Any experience to report yet?

So far so good.  At least I don't have any complaints.  My wife does like the pillion seat better than the stock.  So a big plus there.  Trying to stage a 1k mile tour but the heat this time of year has me reconsidering.

Posted: **Thu Jul 23, 2015 10:29 am**

My seats have arrived. Very very comfy and for me worth the money. If you are changing the rear seat as well you will have to remove the seat barrel lock assembly and Fit it to the new Sargent saddle (it's 3 x T15 torx screws so don't plan on selling your old seats unless someone else has their own lock to fit. Very easy to fit and to the usual excellent standards of construction.

Sent from my iPhone using Tapatalk

Posted: **Thu Jul 23, 2015 12:04 pm**

bunny2585 wrote: My seats have arrived. Very very comfy and for me worth the money. If you are changing the rear seat as well you will have to remove the seat barrel lock assembly and Fit it to the new Sargent saddle (it's 3 x T15 torx screws so don't plan on selling your old seats unless someone else has their own lock to fit. Very easy to fit and to the usual excellent standards of construction.

Sent from my iPhone using Tapatalk

One consideration is to order another switch/lock assembly from BMW.  This would offer an easy swap of the rear seat without having to re-install and potentially ruin the plastic screw holes.  The lock cylinders can be key matched as well.

Posted: **Thu Jul 23, 2015 10:50 pm**

ppalac wrote:
One consideration is to order another switch/lock assembly from BMW.  This would offer an easy swap of the rear seat without having to re-install and potentially ruin the plastic screw holes.  The lock cylinders can be key matched as well.

I do not understand that... The rear set does not have a lock assembly in the 2015 model, was that different earlier?

Frank
Sent from my iPad using Tapatalk HD

Posted: **Thu Jul 23, 2015 11:29 pm**

fmantek wrote: I do not understand that... The rear set does not have a lock assembly in the 2015 model, was that different earlier?

Frank
Sent from my iPad using Tapatalk HD

Hi Frank - Per image (2015 R1200RT LC), the rear/pillion seat has the lock cylinder and switch for pillion heated seat.  Hope I'm making sense there.

Re: Sargent Seat - R1200RT LC
Re: Sargent Seat - R1200RT LC

Posted: **Sun Aug 09, 2015 11:23 pm**

ppalac wrote:
Hi Frank - Per image (2015 R1200RT LC), the rear/pillion seat has the lock cylinder and switch for pillion heated seat.  Hope I'm making sense there.

Re: Sargent Seat - R1200RT LC
Re: Sargent Seat - R1200RT LC

yes, you do. Was my mistake.

Tx

Frank

Sent from my iPad using Tapatalk HD

Posted: **Sat Aug 15, 2015 9:28 pm**

Which of the seats did you get? Is there a difference  between both models that Sargent  sells for the rt 14+

Sent from my SM-N910V using Tapatalk

Posted: **Sun Aug 16, 2015 3:37 pm**

I chose the standard height.  I sat on the low height seat and thought I would miss some of the extra padding.

Aside from some custom accouterments, the only other "standard" options that I recall that were available was seat material.

Posted: **Sat Aug 29, 2015 12:11 pm**

Before switching to the 15 RTLC, I owned a 14 GSLC, and purchased the Sargent seat for the GS.  It really made a difference for longer trips over 200 miles.  It may take a few hundred miles to begin breaking in, but really liked the Sargent product, and the price was much better in comparison to Corbin, or Russell Day Long and others. 

Does anybody know what the appearance would be if you ONLY buy the front seat and keep the stock rear what they would look like together, and also how they would fit together?

Posted: **Mon Aug 31, 2015 3:53 am**

They also sell a "Plus" model now that is almost the same as the Performance seat, except adds grippier (not a word) side panels, and the option to leave off the welting.  I'll probably opt for that seat, since I've always thought the constant rubbing over the welting was a potential cause of seam failure.  However, I've never heard of people complain about it.