BMW R1200RT/R1250RT Forum

:nervous: :nervous: :nervous:

richardbd wrote: :nervous: :nervous: :nervous:

Which one of you is talking and what are you talking about?

I know.  GPS. And no now 3 years of models on, still the same button.  The good news is the more times you take it off and on the less the button sticks in. 

I am not worthy oh Omnipotent one of course I should have realised that was what he was talking about, forgive me oh clown of red hair for not knowing the obvious. I am off to lay on my bed of nails as penance, ouch!

Same make of cheap mattress as me then.

I'm working on a mechanism - using the same electric engine as locking the fearing pockets - so the GPS will lock on when using the remote etc  ^-^

But , my concern is that the locking tab on the holder is NOT strong enough to prevent a theft - even if locked.

To easy just to drag the GPS out of the holder - even with the button locked.

RTman10 wrote: Same make of cheap mattress as me then.

Sounds like my old Army mattress is still doing the rounds

I actually find it difficult to get the satnav out of the cubbyhole it's in, the amount of times I have nearly dropped it is quite a few. I never leave my satnav on the bike unless it's coming in doors. However, Steinar I am sure that some deterrent [size=78%]is better than no deterrent. They do say if somebody wants it  (talking about thieves) they will take it, but the longer it takes them the greater the risk of being caught. [/size]

STeinar wrote: I'm working on a mechanism - using the same electric engine as locking the fearing pockets - so the GPS will lock on when using the remote etc  ^-^

But , my concern is that the locking tab on the holder is NOT strong enough to prevent a theft - even if locked.

To easy just to drag the GPS out of the holder - even with the button locked.

I have the locking kit fitted to mine, and while I know it wouldn't really stop anyone taking the satnav for me I feel it just gives a little peace of mind while say popping into the shop etc 

Benchmark wrote: I have the locking kit fitted to mine, and while I know it wouldn't really stop anyone taking the satnav for me I feel it just gives a little peace of mind while say popping into the shop etc 

Interesting to read, as this is exactly how I'm working on mine :-)
Good documented also - grate job  ^-^

Only difference is that I'm trying to block the upper locking mechanism on the top of the holder to be able to be lifted.
This as I find that it's easier to dismount the GPS - if only the push-button is blocked.

More to come 

First off i'am terrible at posting pictures sorry!!
I fixed the locking problem for the GPS at a cost of about 25 american cents!
Solution was very simple, remove windshield, look straight down at locking button, drill a 1/16 hole in button about 1/8 inch out from GPS housing
I then installed a stainless aircraft sheet metal screw along with 2 small washers into release button
With screw I place not possible to press release button, once windshield back on in PARKED position, no longer possible to access sheet metal screw
I know it's not hi tech or BMW approved but it works
If you want pictures post a email address and I can send some
Jim

Nice simple idea to lock permanently but thats the problem you cannot now easily take it out to plug into a computer for route downloads or maintenance. It really is about time BMW fixed this problem along with the digital speedo MPH to KPH issue. However as we are still buying I guess nobody gives a sh *t.

Hi ,if you can send me pictures
didier.p@me.com
Thank you.


Envoyé de mon iPhone à l'aide de Tapatalk

Leolou pics sent

Thank you


Envoyé de mon iPhone à l'aide de Tapatalk