Page 1 of 2
Rear red LED lights, Topbox painted and horn.
Posted: Sun Jan 10, 2016 10:47 pm
by Gadgetsandwheels
Fitted some LED additional lights at very low cost, resprayed my Topbox in San Marino blue and fitted an additional horn. See my YouTube video
https://youtu.be/2gVPrH7N84U
Cheers
Re: Rear red LED lights, Topbox painted and horn.
Posted: Mon Jan 11, 2016 8:05 am
by guest3074
So I'm not the only one to use a piece of string to show the brake lights
)
https://www.youtube.com/watch?v=7ehTTV-4uro
Re: Rear red LED lights, Topbox painted and horn.
Posted: Mon Jan 11, 2016 12:37 pm
by Steve F
Gadgetsandwheels,
Good job there! Plus the DIY re-spray job on the box lid. Very neat. Re your extra brake lights - any particular reason why you didn't opt for hi-level brake lights in the top box recess (such as Skene P3's)?
PS One of you had better patent the string pull on the brake lever!!
Re: Rear red LED lights, Topbox painted and horn.
Posted: Tue Jan 12, 2016 11:37 am
by David.
Looking at the two videos, the Top Boxes are different.
Re: Rear red LED lights, Topbox painted and horn.
Posted: Tue Jan 12, 2016 1:46 pm
by Steve F
Oops! My mistake. Thanks for the correction. I just took it for granted that he'd re-sprayed the 'new' top box from it's dull aluminium colour to the topical SM Blue ! :-[ The Blueness overwhelmed my spotting that mistake!!
Re: Rear red LED lights, Topbox painted and horn.
Posted: Thu Jan 21, 2016 1:48 pm
by Gadgetsandwheels
Steve F wrote:
Gadgetsandwheels,
Good job there! Plus the DIY re-spray job on the box lid. Very neat. Re your extra brake lights - any particular reason why you didn't opt for hi-level brake lights in the top box recess (such as Skene P3's)?
PS One of you had better patent the string pull on the brake lever!!
Thanks. Wanted a with or without top box additional lighting. It's an older top box too as I wanted to avoid spending that much for a new one. May be overboard to put more on the top but all us possible:-)
Re: Rear red LED lights, Topbox painted and horn.
Posted: Mon Jan 25, 2016 10:59 pm
by David.
Presumably your Bike doesn't have Hill Start Control which I've read, once applied, activates the Brake Light without having to then hold the front brake lever or press the rear brake pedal.
Re: Rear red LED lights, Topbox painted and horn.
Posted: Mon Jan 25, 2016 11:21 pm
by Gadgetsandwheels
DaygloDavid wrote:
Presumably your Bike doesn't have Hill Start Control which I've read, once applied, activates the Brake Light without having to then hold the front brake lever or press the rear brake pedal.
Yes it has that but I think you gotta have the engine running. So many additional things to add to these bikes. How long is a piece of string? About 6ft.
Re: Rear red LED lights, Topbox painted and horn.
Posted: Tue Jan 26, 2016 8:00 am
by guest3074
DaygloDavid wrote:
Presumably your Bike doesn't have Hill Start Control which I've read, once applied, activates the Brake Light without having to then hold the front brake lever or press the rear brake pedal.
Yes it does, but showing the brake light come on and off is easier with someone operating it, as I didn't have her indoors handy out came the string
Re: Rear red LED lights, Topbox painted and horn.
Posted: Tue Jan 26, 2016 8:15 am
by David.
Thanks to you both for your replies.
So with the engine running, once the Hill Start Control is activated, the Brake Light comes on until you deactivate the HSC or ride off.
Have I got that correct.
Re: Rear red LED lights, Topbox painted and horn.
Posted: Fri Feb 05, 2016 9:36 am
by Gadgetsandwheels
DaygloDavid wrote:
Thanks to you both for your replies.
So with the engine running, once the Hill Start Control is activated, the Brake Light comes on until you deactivate the HSC or ride off.
Have I got that correct.
Yeah. That's how it works for me.
Re: Rear red LED lights, Topbox painted and horn.
Posted: Sun Feb 28, 2016 6:28 pm
by Gadgetsandwheels
Gadgetsandwheels wrote:
Fitted some LED additional lights at very low cost, resprayed my Topbox in San Marino blue and fitted an additional horn. See my YouTube video
https://youtu.be/2gVPrH7N84U
Cheers
UPDATE ON THE REAR LED LIGHTS
After riding the bike for a few hours with no problems, the computer decided that it didn't like these LED lights, threw up the warning symbol on the dash and switched of all the back lights. Leaving me with the only option to disconnect them. I wanted to warn you as what seemed like a good idea (knowing that there was always a chance of can us issues) turned out not to be so good. What worked initially for some time, obviously isn't a permanent solution. Just thought I'd add this note to save anyone else going down the same route.
Re: Rear red LED lights, Topbox painted and horn.
Posted: Sun Feb 28, 2016 6:43 pm
by Casbar
I have just ordered some Skene P3s to mount next to the number plate. These have been fitted to many LC RTs and work fine. I already have the top box brake light, but quite often ride without a top box.
Re: Rear red LED lights, Topbox painted and horn.
Posted: Sun Feb 28, 2016 6:44 pm
by guest3074
Gadgetsandwheels wrote:
UPDATE ON THE REAR LED LIGHTS
After riding the bike for a few hours with no problems, the computer decided that it didn't like these LED lights, threw up the warning symbol on the dash and switched of all the back lights. Leaving me with the only option to disconnect them. I wanted to warn you as what seemed like a good idea (knowing that there was always a chance of can us issues) turned out not to be so good. What worked initially for some time, obviously isn't a permanent solution. Just thought I'd add this note to save anyone else going down the same route.
I was led to believe that if you added the factory LED brake light that the bike needed to be programmed for the addition so as to not cause a problem with canbus errors, as I say only what I've heard so dont take it as gospel
Best option is to use a separate controller such as
skeene IQ-260
Re: Rear red LED lights, Topbox painted and horn.
Posted: Sun Feb 28, 2016 6:54 pm
by Gadgetsandwheels
Benchmark wrote:
I was led to believe that if you added the factory LED brake light that the bike needed to be programmed for the addition so as to not cause a problem with canbus errors, as I say only what I've heard so dont take it as gospel
Best option is to use a separate controller such as
skeene IQ-260
Thanks. I will put some thought into it and maybe go down that route. Shame. They actually looked pretty good.