Pannier 'City lids' for R1200RT LC
- elephant8869
- Posts: 70
- Joined: Fri Jul 25, 2014 11:09 pm
Pannier 'City lids' for R1200RT LC
Does anyone know where I can buy the pannier city lids for the panniers on the liquid cooled RT? These are the replacement lids which reduce the pannier width by about 100mm?
Re: Pannier 'City lids' for R1200RT LC
A quick search came up with http://www.pbhardware.com/SlimCase_pann ... y_lids.htm
Re: Pannier 'City lids' for R1200RT LC
You will only get aftermarket ones. BMW haven't made them since 2004.
-
- Posts: 86
- Joined: Thu Nov 05, 2015 6:36 pm
Re: Pannier 'City lids' for R1200RT LC
How about saddle bags for the RT LC that open on the top like the GS. I hate that everything tries to fall out every time you open them up.
Re: Pannier 'City lids' for R1200RT LC
yellowjacket wrote: How about saddle bags for the RT LC that open on the top like the GS. I hate that everything tries to fall out every time you open them up.
I agree. The ones our cops use are just the job, although they are narrower (so hold less) than the OEM ones...
- elephant8869
- Posts: 70
- Joined: Fri Jul 25, 2014 11:09 pm
Re: Pannier 'City lids' for R1200RT LC
Thanks Richards, I've contacted nedplex and they do make slim lids for the watercooked RT panniers. Cheers
- elephant8869
- Posts: 70
- Joined: Fri Jul 25, 2014 11:09 pm
Re: Pannier 'City lids' for R1200RT LC
I found another slim pannier case manufacture/supplier in France called BCD http://www.bcd-design.com/en/catalog-bmw/
- exportman
- Posts: 307
- Joined: Tue Sep 27, 2016 7:57 pm
- Bike Model and Year: R1250RT 2023
- Has liked: 9 times
- Been liked: 45 times
Re: Pannier 'City lids' for R1200RT LC
Hi
Purchased a set for my new 2017 RT from Nedplex Holland. Arrived in 3 days. They fit but will not lock the metal lugs are too short to engage with the pins
Sent them an email tonight will post their response
Purchased a set for my new 2017 RT from Nedplex Holland. Arrived in 3 days. They fit but will not lock the metal lugs are too short to engage with the pins
Sent them an email tonight will post their response
- exportman
- Posts: 307
- Joined: Tue Sep 27, 2016 7:57 pm
- Bike Model and Year: R1250RT 2023
- Has liked: 9 times
- Been liked: 45 times
Re: Pannier 'City lids' for R1200RT LC
Hi
They came back quickly and asked for photos, however having a second look with a little more time 5 mins with a Dremel and all is good
I have not yet painted them don't know if I will may be in the summer when the weather is warmer.
They came back quickly and asked for photos, however having a second look with a little more time 5 mins with a Dremel and all is good
I have not yet painted them don't know if I will may be in the summer when the weather is warmer.
Re: Pannier 'City lids' for R1200RT LC
And your reason for fitting them is? Can't be filtering, if the front goes through so does the back. They are designed that way. One of the advantages of the OEM is if you are unfortunate enough to drop it at a standstill (easily done).
, the lids save some very expensive bodywork and bits like end cans and drive shafts.
I never ride without them.
, the lids save some very expensive bodywork and bits like end cans and drive shafts.
I never ride without them.
Last edited by guest2360 on Sat Nov 05, 2016 6:21 pm, edited 1 time in total.
- exportman
- Posts: 307
- Joined: Tue Sep 27, 2016 7:57 pm
- Bike Model and Year: R1250RT 2023
- Has liked: 9 times
- Been liked: 45 times
Re: Pannier 'City lids' for R1200RT LC
RTman10 wrote: And your reason for fitting them is? Can't be filtering, if the front goes through so does the back.
Only if you are going in a straight line.
Re: Pannier 'City lids' for R1200RT LC
exportman wrote:
Only if you are going in a straight line.
Wow must be a riding God, he can corner hard enough to scrape the pannier lids 8)