Page 1 of 1
Brake pedal adjustment
Posted: Sun Jun 19, 2016 9:26 pm
by Rwslater
i have a 2015 1200RT and put lowering foot pegs on. I adjusted the shifter down already (easiest job I have ever done on any vehicle), now I'd like to adjust the brake pedal down a bit. Just looking at it, it doesn't look like it will be as easy as the shifter. Has anyone done this and have any advice? Pictures maybe?
Thanks
Ron
Re: Brake pedal adjustment
Posted: Mon Jun 20, 2016 10:19 am
by daverj
You can undo the clevis pin and screw the rod in or out of the cylinder to adjust the pedal. Put the same kit on mine.
Re: Brake pedal adjustment
Posted: Mon Jun 20, 2016 11:37 am
by Rwslater
daverj wrote:
You can undo the clevis pin and screw the rod in or out of the cylinder to adjust the pedal. Put the same kit on mine.
Very good, thanks.
Re: Brake pedal adjustment
Posted: Sat Jun 25, 2016 4:52 pm
by axamax
I need to raise the brake pedal on a 2012 rt.
It doesn't look to be much adjustment. There's a stop screw near front of the pedal and the rod to the cylinder. Would that give me around half inch adjustment at pedal end?