Page 1 of 1
LED Driving Lights
Posted: Sun Jul 03, 2016 9:20 pm
by odiethedog
Evening all, got some LED driving lights for fathers day and I thought it would be easy to connect them in to the main beam but it looks a right chew on.....
Can any of you suggest the best place to join in to?
Id prefer they only came on when the ignition is switched on.
Thnaks
Re: LED Driving Lights
Posted: Mon Jul 04, 2016 2:41 pm
by bighopper
I installed some after market LED onto the OEM brackets. I powered them through a fuze block to a Skena IQ-275 Intelligent Lighting Controller. The trigger I used to turn them on is the wire from the tail light, so they come on/off with powering up or turning off the bike.
This was on a 2016 RT.
Re: LED Driving Lights
Posted: Mon Jul 04, 2016 5:47 pm
by iRider
I fitted OEM LED lights to my 2015 RT, However I do have 2 other items that are ignition switched, namely a camera and hyperlite brake lights. Both get their power from one of these
http://www.fuzeblocks.com which is ignition switched by the feed to the rear accessory socket.