Page 1 of 1

Migsel mount

Posted: Fri Aug 19, 2016 3:58 pm
by TCM
Hi, does anyone know if a migsel mount that fits a 2009 rt will fit a 2010 tc rt?

Re: Migsel mount

Posted: Fri Aug 19, 2016 4:24 pm
by David.
Migsel offer 3 GPS mounts, http://www.migsel.com/store/index.php?_ ... at&catId=6

Articulated type - up to 2009
Image

Articulated type - from 2010
Image

RAM type - all non LC
Image

Looks like if you've got the up to 2009 articulated type it will not fit the from 2010 TC.

The Ram type - all non LC, fits both.

Re: Migsel mount

Posted: Fri Aug 19, 2016 4:24 pm
by guest2360
If you are talking about the GPS mount that goes above the clocks their site shows 1 up to 2009 and 1 2010 onwards. So they don't think so. The moulding round the instruments are different but the BMW one that seems to use the same connection points fits both.

Re: Migsel mount

Posted: Fri Aug 19, 2016 4:48 pm
by David.
This BMW GPS mount fits 2010 - later, https://www.ascycles.com/2/BMW-Motorcyc ... ctID/42143

Image

Re: Migsel mount

Posted: Fri Aug 19, 2016 4:52 pm
by TCM
Thanks for the quick replies, it's the ram type, my brother has one so i'll try his and let you know what the verdict is!

Re: Migsel mount

Posted: Fri Aug 19, 2016 4:54 pm
by David.

Re: Migsel mount

Posted: Fri Aug 19, 2016 4:59 pm
by David.
TCM wrote:It's the ram type, my brother has one so i'll try his and let you know what the verdict is!
This thread shows the Migsel RAM type mount & confirms it fits all non LC RT's, https://1200rt.com/viewtopic.php?p=14456#p14456

Artemis posted, "it fits all non-WC RTs.  I had one on a 2007 and it will fit my 2011."

Image

Re: Migsel mount

Posted: Fri Aug 19, 2016 5:10 pm
by guest2360

This BMW GPS mount fits 2010 - later, https://www.ascycles.com/2/BMW-Motorcyc ... ctID/42143

It can be made to fit earlier models as well as many owners  fitted them when they first came out as they put the GPS higher than the earlier design..

Re: Migsel mount

Posted: Fri Aug 19, 2016 5:25 pm
by David.
Would a BMW dealer modify a genuine part to fit another model, when there is a model specific alternative.

Re: Migsel mount

Posted: Fri Aug 19, 2016 5:54 pm
by guest2360
It didn't need to be modified.  Can never remember fitting them just selling them.
From memory you needed to modify or replace the securing bolts.

Re: Migsel mount

Posted: Fri Aug 19, 2016 8:37 pm
by David.
The Trim panel upper part has the same part no. 46637682929 for all non LC R1200RT's.

Image

2005 http://www.realoem.com/bmw/enUS/showpar ... Id=46_0906

2010 http://www.realoem.com/bmw/enUS/showpar ... Id=46_1260