I dropped my bike...
I dropped my bike...
So, filled up on my way home, pulled on to the drive, on the side stand. Put my helmet, gloves and jacket in the stowage, walk back out to push the bike in to the garage, in auto mode, rather than grab the handle, I put my hand on the seat (how I used to push the Bandit) and before I know it, she's falling away from me! Fortunately, the wheelie bin took the force of the fall on to her right side (thank god for the engine case protectors!)
So, pulled her back up, there was a puddle of oil/fuel on the floor, from the pipe that exits by the centre stand (is this fuel tank overflow?).
Then I found the screw on the floor, that I'm assuming came from the same area as the pipe, as it was right next to the fluid on the floor? Any screw gurus give me an idea where it may be from?!
So, pulled her back up, there was a puddle of oil/fuel on the floor, from the pipe that exits by the centre stand (is this fuel tank overflow?).
Then I found the screw on the floor, that I'm assuming came from the same area as the pipe, as it was right next to the fluid on the floor? Any screw gurus give me an idea where it may be from?!
Re: I dropped my bike...
One pipe is the overflow from the fuel filler. The other is an engine breather. I reckon that bolt is a stray panel bolt that just dropped out. Wouldn't worry too much as I don't see how you could have damaged anything near the pipes in a simple drop.
Last edited by guest2360 on Fri Apr 07, 2017 7:07 am, edited 1 time in total.
Re: I dropped my bike...
Thanks. She's a big old lump when she rolls over! Just couldn't stop it. Fortunately the bin took the weight of the fall. I'll be getting hands on over Easter leave, so will see if I can find where the screw is from
- David.
- Subscriber
- Posts: 8300
- Joined: Fri Nov 07, 2014 7:29 pm
- Location: North Yorkshire
- Bike Model and Year: R1200RT (Camhead) 2012
- Been liked: 387 times
Re: I dropped my bike...
The screw looks like a self tapper with the head chewed up, it's defo. not a panel screw, haven't seen anything like that on my 2012 RT.
Re: I dropped my bike...
You're not the first and certainly [size=78%]won't be the last to drop your bike.[/size]
- Sprintgull
- Posts: 493
- Joined: Tue Jul 05, 2016 12:41 pm
Re: I dropped my bike...
Ouch. We've all been there. Glad no lasting damage to you or the bike. Did something similar with my old K1300GT. It started to fall towards the shiny new car. Fortunately I got something soft between them just in time - me. Not sure on the screw. It could just have been loitering in some nook or cranny until it's world turned through 90 degrees. Wise to check though.
- smileymiley
- Posts: 395
- Joined: Tue Mar 17, 2015 8:24 am
- Location: Grantham
- Bike Model and Year: R1200RT 17MY
- Has liked: 6 times
- Been liked: 11 times
Re: I dropped my bike...
Yep once they go past THAT point there's nothing you can do...... [attachimg=1]Dogbreath wrote: You're not the first and certainly [size=78%]won't be the last to drop your bike.[/size]
Vini, Vidi, Velcro....... I came, I saw, I stuck around.
Re: I dropped my bike...
Thanks guys. I dread to think of the screech I made as I tried to grab it as it fell away... thank god i didnt have the side panniers! It's going in to the garage week after next for a full service, to get to the bottom of this 'clunking' at idle, give me a base line and see if the lack of cruise control is a switch issue or not.
Getting used to the character now and loving it!
Getting used to the character now and loving it!
Re: I dropped my bike...
Mac77 wrote: Thanks guys. I dread to think of the screech I made as I tried to grab it as it fell away... thank god i didnt have the side panniers!
Interesting...
There's a school of thought that the panniers generally do a good job of protecting some of the more expensive parts of the bike. You reckon not having them on was a benefit?
- timminator
- Posts: 441
- Joined: Tue Mar 08, 2016 3:48 am
- Been liked: 2 times
Re: I dropped my bike...
richardbd wrote: There's a school of thought that the panniers generally do a good job of protecting some of the more expensive parts of the bike. You reckon not having them on was a benefit?
I agree Richard, scraping up a pannier is generally a lot less expensive than the alternative. I have a video here to prove it...at the risk of embarrassing myself. A lesson in proper pillion mounting technique. (This is me and my girlfriend on our first 2-up ride)
https://www.dropbox.com/s/94by4vfyxxsickd/Drop.mov?dl=0
Last edited by timminator on Fri Apr 07, 2017 6:09 pm, edited 1 time in total.
BMW MOA #210438
- timminator
- Posts: 441
- Joined: Tue Mar 08, 2016 3:48 am
- Been liked: 2 times
Re: I dropped my bike...
That's ok, I find it quite amusing myself now too, the fact that zero damage occurred makes it a lot easier to laugh. Note the scuff in the pillion seat where her boot got caught up. I think that's what triggered the whole thing. It's really a testament to the BMW cylinder guards and strength of the panniers.Sullivj wrote: Thanks for sharing. I'm sorry to admit that I found it quite amusing..
BMW MOA #210438
Re: I dropped my bike...
Well - at least she was kind enough to say sorry! :-)
Cool that the bike had zero damage though...
Cool that the bike had zero damage though...
Re: I dropped my bike...
My panniers are painted the whole side, so would of scuffed? Fortunately, my wheelie bin took the brunt of the weight, through the seat