BMW R1200RT/R1250RT Forum

Has anyone utilised the audio blanks in the N/S fairing cover for anything?

Yes


Filled them with latch buttons for my accessories.  Controls power to aux marker lights, cameras and two way.  I have a fuse panel behind the speaker blank and that is cabled to the switches before going to the accessories. Power source to the fuse unit is via a relay.


Used 12v 22mm thread SPDT 5pin locking push button switches from Amazon they are not waterproof  but so far no problems  just a little WD40  every now and then


Had to be a bit careful with the fixing  the locking rings overlap  so had to cut then down a little with a Dremel  made the into a D shape

thanks for the idea's exportman.


Have you taken a direct supply from the battery for the relay with a switch feed from the ignition circuit?





[size=78%] [/size]

Hi


Yes  fused feed via relay direct from battery  relay signal from aux socket on RH Side

great thanks for that as I was wondering about the signal