Page 1 of 1
Engine through bolt socket size?
Posted: Mon Jun 19, 2017 12:27 pm
by Topphoto1
Hi Guys and Gals, help! :grave:
I have purchased some engine crash bars for the RT, '05, and I am struggling to get the through engine bolt off, a 19mm & 3/4" feels sloppy! I am wondering if the Bolt is a special, like 18mm, if anyone can help ASAP before I go an waist money on random sockets it would be much appreciated.
Re: Engine through bolt socket size?
Posted: Mon Jun 19, 2017 2:38 pm
by Topphoto1
Re: Engine through bolt socket size?
Posted: Tue Jun 20, 2017 7:41 am
by Our Gee
Whats a "Through Engine Bolt"
Re: Engine through bolt socket size?
Posted: Tue Jun 20, 2017 4:48 pm
by UKDucatiman
Our Gee wrote:
Whats a "Through Engine Bolt"
I can only comment on the Wunderlich front crash bars I fitted to my old 06 RT. There is a mount point going through the bottom of the engine which a long bolt ('through the engine bolt') passes through.
Re: Engine through bolt socket size?
Posted: Sun Jun 25, 2017 11:43 am
by BBT600
my problem wasn't the bolt size but the length of extensions needed to get at em! So I bought the extensions, then I found
it was trickier than I thought and I was short on time and impatient as ever. So I took it into the nearest dealer who charged me £160 and they left the OEM covers in place!! I thought common sense would've told them to remove them or at least ask the question! So I now have double protection just in case the Heed bars wear through.
Re: Engine through bolt socket size?
Posted: Tue Jan 30, 2018 3:01 pm
by Zapata
Hello Team:
I just got the Heed bars from Poland and I am having trouble loosing the "through engine bolt". According to the instructions it will help if the front suspension is compressed. How this will help? What's the function of that long bolt?
Re: Engine through bolt socket size?
Posted: Tue Jan 30, 2018 3:36 pm
by David.
Zapata wrote:According to the instructions it will help if the front suspension is compressed. How this will help?
May have something to do with the front suspension being bolted to the engine. Might prevent any misalignment of the holes when the bolts are removed.
If there is any doubt, seek further advice.
Re: Engine through bolt socket size?
Posted: Tue Jan 30, 2018 10:28 pm
by Zapata
This's from the Wunderlich Instructions for their crashing bars. But you can see the bolt here circled in red.
Thank you.
Re: Engine through bolt socket size?
Posted: Wed Jan 31, 2018 4:39 am
by David.
If the suspension is not compressed, perhaps the bolt head is slightly masked by the telelever wishbone, making access awkward.
Bearing in mind that the photo is of a Hexhead, not a Camhead.
