Page 1 of 1
SPEED BLEEDERS
Posted: Wed Oct 18, 2017 10:30 pm
by T6pilot
if you do your own maintenance and haven’t switched to speed bleeders, your not in the twenth century. Installed some on my 15 this morning, brake flush and install 45 minutes, best part the cost was less than $20, only downside is Bmw uses three different size bleeders on my bike
Re: SPEED BLEEDERS
Posted: Thu Oct 19, 2017 12:05 am
by Boxflyer
Deleted
Re: SPEED BLEEDERS
Posted: Thu Oct 19, 2017 12:19 am
by T6pilot
Boxflyer
Wondered why front left wouldn’t take 6 or 7 mm wrench, good call
Jim
Re: SPEED BLEEDERS
Posted: Thu Oct 19, 2017 1:07 pm
by realshelby
Best money I have spent on my '14 RT! Especially coming from an '04 RT and servicing that brake system, doing the '14 with the speed bleeders seems.....almost too easy!
Re: SPEED BLEEDERS
Posted: Thu Oct 19, 2017 3:14 pm
by Sprintgull
I use something like this:
https://www.amazon.co.uk/Sealey-Vacuum- ... um+bleeder
You just pump a vacuum in the bottle using the hand pump and then open the bleed nipple to suck the fluid out. Works a treat. You can get the same kit cheaper on ebay tho.