Page 1 of 1

Passenger footpegs

Posted: Wed Jan 09, 2019 10:53 am
by matgriff
Hi, went out for our first two-up ride on the R1200RT this weekend. My wife is tall, and she's complaining that her legs are bent up pretty tight on the footpegs.


Is anyone using or can recommend a set of lower or adjustable rear footpegs for a 2005 model ?




Thanks


Mat

Re: Passenger footpegs

Posted: Wed Jan 09, 2019 10:57 am
by Beagle

Re: Passenger footpegs

Posted: Wed Jan 09, 2019 11:21 am
by David.
This passenger footpeg lowering kit will fit all R1200RT's, https://www.nippynormans.com/wunderlich ... g-lc-model

Re: Passenger footpegs

Posted: Wed Jan 09, 2019 12:07 pm
by matgriff
OK thanks for the info.... pricey parts for these BMW's :-)


Mat

Re: Passenger footpegs

Posted: Wed Jan 09, 2019 2:07 pm
by CliveJ

Re: Passenger footpegs

Posted: Mon Jan 14, 2019 1:44 pm
by matgriff
Does anyone know if the rear footpeg mounts are the same on an R1200RT and R1200GS of the same year (2005-2013) ?


I've seen quite a few lowing bracket sets advertised for the 2005 R1200GS, but only a couple for the RT.    The GS ones are significantly cheaper.


Thanks




Mat

Re: Passenger footpegs

Posted: Mon Jan 14, 2019 2:52 pm
by David.
matgriff wrote:Does anyone know if the rear footrest mounts are the same on an R1200RT and R1200GS of the same year (2005-2013)?
R1200RT 05-09 (K26),  #04 46 71 2 310 403 FOOTREST, REAR LEFT
Image

R1200GS 05-07 (K25),  #07 46 71 2 310 403 FOOTREST, REAR LEFT
Image

Re: Passenger footpegs

Posted: Mon Jan 14, 2019 3:38 pm
by Beagle
matgriff wrote: Does anyone know if the rear footpeg mounts are the same on an R1200RT and R1200GS of the same year (2005-2013) ?


I've seen quite a few lowing bracket sets advertised for the 2005 R1200GS, but only a couple for the RT.    The GS ones are significantly cheaper.


Thanks




Mat

If you email Nippy Norman they will tell you what fits yours. Ive found them prompt and helpful.

Re: Passenger footpegs

Posted: Tue Jan 15, 2019 7:53 am
by matgriff
Thanks for the parts fiche, according to that they are both the exact same part number for the left and right rear including rubber for both bikes :-)


That's good, I'll take a closer look at the GS lowering mounts and see if there's any reason they won't fit the RT




Thanks




Mat